Polycom 8030, 8020, 1725-36038-001 manual Using the SIP Handset

		Using the SIP Handset
If you want to…	Then…
Forward calls	Calls may be forwarded on a per-line basis. The Line menu display will indicate
	if a line is forwarded by a > character followed by the destination address.
	•	When a line is forwarded, the standby screen displays the forwarding
		status, unless the do-not-disturb feature is enabled.
	•	If your handset has multiple lines, set or clear forwarding for each line
		individually.
	1	Press START or press Line and a line number to select the line that you want
		to be forwarded.
	2	Press FCN and select the Set/Clear Forward item from the FCN menu using
		a digit key or NavOK key.
	3	Enter the forwarding number for the indicated line.
	4	Press NavOK to save.
	To clear call forwarding for a given line #, again press START or select the line #.
	Again select the Set/Clear Forward item from the menu.
Clear forwarding on a	Press START or select the line number. Select the Set/Clear Forward item from
line	the menu.
Listen to voicemail	1	Press START.
	2	Press Msg softkey, or
		Dial your voice message system number
	3	Press START or Nav OK.
Do Not Disturb	1	Press START.
(reject all incoming	2	Press FCN.
calls)	3	Select the Do-Not-Disturb item from the menu and press NavOK.
	When the do-not-disturb feature is enabled, the standby screen will display Do
	Not Disturb. The handset will not ring for new incoming calls.
Clear Do Not Disturb	1	Press START.
	2	Press FCN.
	3	Select the Do-Not-Disturb item from the menu and press NavOK .
Redial the last	1	Press START.
number you dialed	2	Press the Redl softkey.
	3	Verify that the displayed number is the one you want and the line number is
		valid.
	4	Press NavOK or START.

PN: 1725-36038-001_B.doc 67