SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Daylight Savings
The handset may be adjusted for daylight savings time.
Password Enable/Disable/Change
The password option controls access to the Admin menu. It is enabled by default with the password 123456. The Password option operates as a toggle between Enabled and Disabled. The info line will display the current state. Press NavOK to change the password protection state. To modify the password requirement, the default or previously set password must be entered to verify the change. Change Password will appear only if the password is enabled. The password is disabled by default. The password must be set in each handset for which controlled access is desired.
SIP Registration
Individual handsets may be configured to correspond with the SIP configuration information in the TFTP server. The handset is then automatically identified at startup. If username and password information is not configured in the Admin menu, then this information will be requested at startup
In either case, the username must agree with a corresponding configuration file. See Chapter 5 Programming the SIP Handset Features, section SIP TFTP Server Configuration Files.
Login allows you to specify a username and password for automatically acquiring SIP configuration information. If no username is specified, the SIP handset will request username and password at startup and any additional registrations specified here are ignored.
The username should correspond to the primary (line 1) dial number assigned to the user. The username and password should also correspond to the authentication credentials as created by your system administrator for your primary line registration. Usernames or passwords can be erased by selecting the item, then pressing the Bksp softkey and then the Save softkey.
Reg 2, Reg 3, and Reg 4 allow you to specify additional authentication usernames and passwords that may be required by your handset for any additional line appearances (registrations) that may appear in the specific user’s configuration file. This information will be ignored if a Login username is not provided.
28 | PN: |