Polycom 1725-36038-001, 8020, 8030 manual Softkey Name Displayed during… Press to…

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

Softkey	Name	Displayed during…	Press to…
Hold	Hold	In an active call.	Place the call on hold. The line status
			shows	when the call is on hold or
			when audio is flowing.
Msg	Message	Initial dial screen when new	Initiate a call to the specified
		line is selected and a dial	message center contact address for
		tone is active prior to	retrieval or administration of
		entering first character of the	voicemail.
		number to be dialed7.
Mute	Toggle muting	In an active call.	Toggle audio transmission to the far
			end. The line status shows			when
			not muted or		when muted.
OK	OK	Power up registration if	Send the username and password to
		username is not configured	the SIP server for authorization to
		in admin menu.	register the handset.
Redl	Redial	Prior to entering the first	Redial the last number that was
		character of a dial number.	dialed.
Rej	Reject	Incoming call on the selected	Reject the incoming call. The SIP
		line.	server will then redirect the call
			elsewhere.
Resm	Resume	In an active call and you	Resume a call that was previously
		have placed the call on hold	placed on hold or that went on hold
		or in standby mode if any call	when another line was activated.
		is on hold.
Save	Save	Entering a dial number as a	Save the dial number as the
		forward destination.	forwarding destination for the
			selected line.
Symb	Symbols	Entering a username or	Select the set of symbols available
		password.	on the keypad while entering data.
		Entering the digits of a
		number.

7Appears only if the PROXYn_MAIL_NOTIFY is configured. A message center contact address must be defined for the proxy used by the selected line.

62 PN: 1725-36038-001_B.doc