Using the SIP Handset
Handset Operation
If you want to… | Then… | |
|
|
|
Turn the handset on | Press and hold the END key until two chirps sound. | |
|
| |
Turn the handset off | Press and hold the END key. One chirp will sound. If you are in a call, hang up | |
| first, then turn off the handset. | |
|
| |
Unlock the keypad | Press the Unlk softkey, then #. | |
|
| |
Lock the keypad | While in Standby press the Cfg softkey, then press NavOK. | |
|
|
|
Place a call | 1 | To dial a number, follow any one of these sequences: |
|
| » Press the START key, wait for a dial tone, then dial the number. Then |
|
| press either START again or Nav OK. |
|
| » Dial the number and then press the START key or Nav OK. |
|
| » Press the Spkr softkey, then dial the number. Then press START or Nav |
|
| OK. |
|
| » Press the START key; press the Favr softkey; use the Nav cd keys to |
|
| select the number or user from the list; press Nav OK to dial the |
|
| number. |
| 2 | Listen for the ring to indicate the alerting of the called party. |
| Note: Line 1 is the default line. | |
|
|
|
Place a call from | 1 | Press START or Spkr. |
Favorites menu | 2 | Listen for dial tone. |
| ||
| 3 | Press the FAVR softkey. |
| 4 | Use the Nav keys to navigate to the desired entry. |
| 5 | Select the entry by pressing NavOK. |
| 6 | Press START or NavOK to place the call. |
|
|
|
PN: | 65 |