7
Testing a Handset
Verify proper registration and operation of each handset by performing the following tests on each handset in an active wireless area.
1.Power on the handset by pressing the END key. A series of messages will be displayed as the handset acquires the system. The handset should display the user extension.
2.Place a call and listen to the audio quality. End the call by pressing the END key.
3.Place a call to the handset and verify ring, answer, clear transmit, and clear receive audio.
4.Use the softkeys to verify all softkey programmed features on the handset.
5.Press the END key. Any line indicators should turn off and the extension number display will return.
If any of these steps fails to operate as described, refer to Chapter 11
Troubleshooting for corrective action.
PN: | 71 |