GETTING STARTED
Your SpectraLink 8020/8030 Wireless Telephone uses radio wave technology to send and receive voice transmissions. It is designed to operate like a cell phone. However, the handset uses the private telephone system installed in your facility and will not operate outside the area covered by this system. See the User Guide for detailed information about how to use your handset.
The handset's Battery Pack must be fully charged before its first use. Place the handset into the charger for a minimum of two hours before using it. See the section Charger Models for full information.
Basic Handset Operation Summary
If you want to Then
Remove the Press down on the latch on the Battery Pack at Battery Pack the back of the handset and pull the Battery
Pack towards you. The Battery Pack releases outward.
Replace the
Battery Pack
Turn the handset on
Turn the handset off
Slide the lip of the Battery Pack into the bottom of the cavity. Push the top of the Battery Pack until it snaps into place. You should not have to force it into the handset.
Press and hold the END key until two chirps sound.
Press and hold the END key. One chirp will sound. If you are in a call, hang up first, then turn off the handset.
English | 5 |