Aiphone FK1629 B 0811YZ All units Static IP addresses are set, For the IP host unit

Page 10

Flow 2

(All units: Static IP addresses are set)

* This is the outline of setting flow. Also make the detailed settings on each setting window referring to the corresponding pages.

START

Write down the MAC addresses of all the IP units to be used in the system in advance by using the “Setting Information Memo” (→P. 30) etc.

*The MAC address is labeled on each unit.

Decide the static IP address for each IP unit.

Make the [Network setting: Individual] settings on each IP unit individually. (→ P. 16)

Connect the units and the PC used for settings to the network, and then turn them on respectively.

Confirm the [Network setting: Common] settings on the IP host unit. (→ P. 16)

*Confirm that the multicast addresses and/or port numbers do not overlap those of other manufacturer’s network devices connected to the same network.

Add IP units you will use in the system at [IP unit registration] on the IP host unit. (→ P. 19)

(The selected unit is added in the list whenever selected.)

: Settings on the IP host unit

: Settings on the IP client units

For the IP host unit

Connect the IP host unit and the PC used for settings directly, and then turn them on. After a while, access "https://192.168.0.40/" from the browser on the PC. (→P. 14)

NOTES:

•When connecting a PC to the IP unit directly, use an Ethernet crossover cable.

•If a warning dialog box for security or guarding against virus programs appears when accessing the web browser, give permission.

(Log in.)

Make the [Network setting: Individual] settings on the IP host unit. (→ P. 16)

*Set it as "Host unit".

*Set the static IP address to the IP host unit.

Update the system at [Updating the system]. (→ P. 28)

If you will connect your site with remote sites, make the remote site connection settings. (→ P. 12)

Make the other system settings. (→ P. 17-28)

For each IP client unit

Connect an IP client unit and the PC used for settings directly, and then turn them on. After a while, access "https://192.168.0.40/" from the browser on the PC. (→P. 14)

NOTES:

•When connecting a PC to the IP unit directly, use an Ethernet crossover cable.

•If a warning dialog box for security or guarding against virus programs appears when accessing the web browser, give permission.

(Log in.)

Make the [Network setting: Individual] settings on the IP client unit. (→ P. 16)

*Set it as "Client unit".

*Enter the IP address of the IP host unit.

* Set the static IP address to the IP client unit.

Update the system at [Updating the system]. (→ P. 28)

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Setting Manual Contents About this Manual Purpose of the System SettingsManual configurations Setting List Title Sub title Sub item Setting range DefaultDT1/DT2 NTP Call Priority Go to P System Setting FlowFrom the chart below, then start the network settings by First selectFlow For the IP host unit All units Static IP addresses are setFor each IP client unit Started Setting the System Using the System Remote site connection settings ProcedureSystem requirements for PC When connecting a PC to the IP unit via a hub switchWhen connecting a PC to the IP unit directly Connect a PC to the IP unitPassword Enter aiphone Turn on the power to the IP unitLog in to the system by setting the following items Go to the nextSystem Setting Details Basic setting procedureClick Network setting Individual in the table Click Network setting Common in the tableRepeat to 5 to make settings to other IP units Close the windowRegistering zones System setting Zone registration RequiredClick IP unit registration in the table of contents Registering IP units System setting IP unit registrationCheck the boxes for the IP units you want to register Collective setting Registering stations System setting Registering stationsHow to select multiple stations Other buttonsClick Advanced station settings in the table of contents Basic setting procedureMaking detailed settings to door stations When you have finished making all the detailed settingsSettings on Stations to be scan monitored window Making detailed settings to master stationsSettings on Other window About the priorityClick Close after you have finished selecting the stations Registering stations to zones System setting Zone settingCheck to select the target stations Click Registering daily transfer scheduleSettings on Weekly schedule setting window Click Transfer schedule setting in the table of contentsSettings on Individual schedule setting window Setting the timer Timer setting Settings on Remote site door call setting window Click Remote site pilot call setting in the tableSettings on Remote site master call setting window Settings on Remote site paging setting windowSetting time and date Time and date setting When uploading setting data Downloading/uploading setting data Setting fileWhen downloading setting data onto the PC Click Downloading setting data in the table of contentsMaintenance Setting Information Memo
Top Page Image Contents