Aiphone FK1629 B 0811YZ operation manual System Setting Details, Basic setting procedure

Page 15

THE SYSTEM SETTING DETAILS

The basic setting procedure

When you have logged in to the system, the setting window appears. You can make the settings on this window.

*Make sure to refer to the on-screen instructions and comments displayed on each window when you make the settings.

*Depending on the PC and its OS or environment, the display may differ.

<Setting window example>

Setting contents display area

The setting items of the selected setting title and their details are displayed here.

GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM

APPENDIX

Table of contents

The setting titles are listed here. Click the title on which you want to make the settings to display the corresponding setting window.

NOTE:

The setting titles not required for a network direct system are also grayed out.

Instructions area

The instructions for settings are displayed here.

Temporarily stored

Click this to save the current setting results temporarily.

*This temporary storing will not update the system with the new setting results. To update the system, click the title “Updating the system” and follow the necessary procedure.

The setting procedure

1

Click a title in the table of contents on which you wish to make the settings.

 

The setting window of the title is displayed.

2

Make the settings on the setting items individually.

3

When you have finished making the settings on the current window, click

 

to save the setting

Temporarily stored

 

results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu. (If you change the current window to another without storing the setting results temporarily, a pop-up window appears asking if you want to store the results temporarily or not.)

4 Repeat step 1 to 3 to make the settings on the other titles.

*To log out of the system, click [Logout] in the table of contents.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Setting Manual Contents Purpose of the System Settings About this ManualManual configurations Title Sub title Sub item Setting range Default Setting ListDT1/DT2 NTP Call Priority First select System Setting FlowFrom the chart below, then start the network settings by Go to PFlow All units Static IP addresses are set For the IP host unitFor each IP client unit Started Setting the System Using the System Procedure Remote site connection settingsConnect a PC to the IP unit When connecting a PC to the IP unit via a hub switchWhen connecting a PC to the IP unit directly System requirements for PCGo to the next Turn on the power to the IP unitLog in to the system by setting the following items Password Enter aiphoneBasic setting procedure System Setting DetailsClick Network setting Common in the table Click Network setting Individual in the tableClose the window Repeat to 5 to make settings to other IP unitsRequired Registering zones System setting Zone registrationRegistering IP units System setting IP unit registration Click IP unit registration in the table of contentsCheck the boxes for the IP units you want to register Other buttons Registering stations System setting Registering stationsHow to select multiple stations Collective settingWhen you have finished making all the detailed settings Basic setting procedureMaking detailed settings to door stations Click Advanced station settings in the table of contentsAbout the priority Making detailed settings to master stationsSettings on Other window Settings on Stations to be scan monitored windowClick Registering daily transfer schedule Registering stations to zones System setting Zone settingCheck to select the target stations Click Close after you have finished selecting the stationsClick Transfer schedule setting in the table of contents Settings on Weekly schedule setting windowSettings on Individual schedule setting window Setting the timer Timer setting Settings on Remote site paging setting window Click Remote site pilot call setting in the tableSettings on Remote site master call setting window Settings on Remote site door call setting windowSetting time and date Time and date setting Click Downloading setting data in the table of contents Downloading/uploading setting data Setting fileWhen downloading setting data onto the PC When uploading setting dataMaintenance Setting Information Memo
Top Page Image Contents