Aiphone FK1629 B 0811YZ operation manual Maintenance

Page 29

MAINTENANCE

This section describes the use of functions for the system maintenance. These functions are available on the web server.

Initializing the system [Initialization]

You can reset the system settings to factory default.

1 Access the web browser and log in. (→P. 14)

2 Click Initialization in the table of contents.

3 Click Initialization .

Downloading system log [System log]

You can acquire the system operation log.

1 Access the web browser and log in. (→P. 14)

2 Click System log in the table of contents.

3 Click Download to acquire the log from the system. 4 Conﬁrm the log, and save it as needed.

NOTE:

The log is overwritten constantly from the oldest records.

Updating the ﬁrmware [Firmware update]

■Downloading updated ﬁrmware data

Please access our web page at http://www.aiphone.net/ and download the ﬁrmware data on the PC to update the system. For the download procedure, see the instructions on our web page.

1 Access the web browser and log in. (→P. 14)

2 Click Firmware update in the table of contents.

3 Click Update .

Another window opens.

4 Click Browse... and select the target ﬁrmware.

5 When the ﬁrmware is displayed in the window, click Upload .

When “Update ﬁrmware.” is displayed, the update process is complete.

NOTES:

•If the power is turned off while it is writing, the product will malfunction.

•The system may not operate normally while updating the ﬁrmware.

NOTE:

If the update fails, try again.

Referring to the troubleshooting guide [Troubleshooting]

1 Click Troubleshooting in the table of contents.

The following information appears in the window.

•Information about the online-help that you can refer to when trouble occurs in setting the system

•Supported characters and symbols

Registering your system [Registration]

1 Click Registration in the table of contents.

2 Click Register to open the registration window, and then register your system on the window.

*If you use an IS-SOFT in the system, enter the license key of the IS-SOFT.

GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM

APPENDIX

29

Image 29

Contents Setting Manual Contents Manual conﬁgurations Purpose of the System SettingsAbout this Manual Title Sub title Sub item Setting range Default Setting ListDT1/DT2 NTP Call Priority From the chart below, then start the network settings by System Setting FlowGo to P First selectFlow For each IP client unit All units Static IP addresses are setFor the IP host unit Started Setting the System Using the System Procedure Remote site connection settingsWhen connecting a PC to the IP unit directly When connecting a PC to the IP unit via a hub switchSystem requirements for PC Connect a PC to the IP unitLog in to the system by setting the following items Turn on the power to the IP unitPassword Enter aiphone Go to the nextBasic setting procedure System Setting DetailsClick Network setting Common in the table Click Network setting Individual in the tableClose the window Repeat to 5 to make settings to other IP unitsRequired Registering zones System setting Zone registrationCheck the boxes for the IP units you want to register Registering IP units System setting IP unit registrationClick IP unit registration in the table of contents How to select multiple stations Registering stations System setting Registering stationsCollective setting Other buttonsMaking detailed settings to door stations Basic setting procedureClick Advanced station settings in the table of contents When you have ﬁnished making all the detailed settingsSettings on Other window Making detailed settings to master stationsSettings on Stations to be scan monitored window About the priorityCheck to select the target stations Registering stations to zones System setting Zone settingClick Close after you have ﬁnished selecting the stations Click Registering daily transfer scheduleSettings on Individual schedule setting window Click Transfer schedule setting in the table of contentsSettings on Weekly schedule setting window Setting the timer Timer setting Settings on Remote site master call setting window Click Remote site pilot call setting in the tableSettings on Remote site door call setting window Settings on Remote site paging setting windowSetting time and date Time and date setting When downloading setting data onto the PC Downloading/uploading setting data Setting ﬁleWhen uploading setting data Click Downloading setting data in the table of contentsMaintenance Setting Information Memo