Aiphone FK1629 B 0811YZ operation manual Setting the timer Timer setting

Page 25

Setting the timer [Timer setting]

Set the time for each operation.

1 Click Timer setting in the table of contents.

2 Set the time for the following operations respectively.

*The setting range is displayed on the right side of each input box.

•[Call]:

Set the duration of call from door stations to [Normal], [Priority] or [Urgent].

•[Communication]:

Set the duration of communication between stations in the system including between remote sites [Via IP].

*[In Local] and [Telephone]: Not available in a network direct system.

•[Paging]:

Set the duration of paging.

•[Monitor]:

Set the duration of monitoring only one station.

•[Scan monitor: Switching]:

Set the duration of monitoring each station while scan- monitoring.

NOTE:

The actual duration slightly differs from the setting value.

•[Contact output]: (Not available)

•[Door release]:

Set the duration of door release.

*If you set the time to “0”, the door is released while the door release button on the master station is held down.

3 Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM

APPENDIX

25

Image 25

Contents Setting Manual Contents About this Manual Purpose of the System SettingsManual conﬁgurations Title Sub title Sub item Setting range Default Setting ListDT1/DT2 NTP Call Priority From the chart below, then start the network settings by System Setting FlowGo to P First selectFlow For the IP host unit All units Static IP addresses are setFor each IP client unit Started Setting the System Using the System Procedure Remote site connection settingsWhen connecting a PC to the IP unit directly When connecting a PC to the IP unit via a hub switchSystem requirements for PC Connect a PC to the IP unitLog in to the system by setting the following items Turn on the power to the IP unitPassword Enter aiphone Go to the nextBasic setting procedure System Setting DetailsClick Network setting Common in the table Click Network setting Individual in the tableClose the window Repeat to 5 to make settings to other IP unitsRequired Registering zones System setting Zone registrationClick IP unit registration in the table of contents Registering IP units System setting IP unit registrationCheck the boxes for the IP units you want to register How to select multiple stations Registering stations System setting Registering stationsCollective setting Other buttonsMaking detailed settings to door stations Basic setting procedureClick Advanced station settings in the table of contents When you have ﬁnished making all the detailed settingsSettings on Other window Making detailed settings to master stationsSettings on Stations to be scan monitored window About the priorityCheck to select the target stations Registering stations to zones System setting Zone settingClick Close after you have ﬁnished selecting the stations Click Registering daily transfer scheduleSettings on Weekly schedule setting window Click Transfer schedule setting in the table of contentsSettings on Individual schedule setting window Setting the timer Timer setting Settings on Remote site master call setting window Click Remote site pilot call setting in the tableSettings on Remote site door call setting window Settings on Remote site paging setting windowSetting time and date Time and date setting When downloading setting data onto the PC Downloading/uploading setting data Setting ﬁleWhen uploading setting data Click Downloading setting data in the table of contentsMaintenance Setting Information Memo