Aiphone FK1629 B 0811YZ operation manual Flow

Page 9

Flow 1

(IP host unit: A static IP address is set,

IP client units: IP addresses are assigned by the DHCP server automatically)

* This is the outline of setting flow. Also make the detailed settings on each setting window referring to the corresponding pages.

GETTING

START

Write down the MAC addresses of all the IP units to be used in the system in advance by using the “Setting Information Memo” (→P. 30) etc.

*The MAC address is labeled on each unit.

Decide the static IP address for the IP unit to be used as the IP host unit.

*Use an address out of the range of DHCP assignment for the IP host unit in order to prevent the address for the IP host unit being assigned to another IP client unit by an influence of the turn-on order between the IP host unit and the router (that has a DHCP server function) etc.

(When making the IP host unit settings after connecting the units to the network)

:Settings on the IP host unit

:Settings on the IP client units

STARTED SETTING THE SYSTEM

(When making the IP host unit settings before connecting the units to the network)

Connect the IP host unit and the PC used for settings directly, and then turn them on. After a while, access "https://192.168.0.40/" from the browser on the PC. (→P. 14)

NOTES:

•When connecting a PC to the IP unit directly, use an Ethernet crossover cable.

•If a warning dialog box for security or guarding against virus programs appears when accessing the web browser, give permission.

(Log in.)

Make the [Network setting: Individual] settings on the IP host unit. (→ P. 16)

*Set it as "Host unit".

*Set the static IP address to the IP host unit.

Connect the units and the PC used for settings to the network, and then turn them on.

Search for the IP address of the IP host unit from the MAC address of the IP host unit by using IS_IPSEARCH.exe (in the CD-ROM included with the IP master station (IS-IPMV)). (If the address does not appear, repeat this step until it appears.) Then access the address from the browser on the PC. (→P. 14)

*This address is the temporary one for the initial setting.

(Log in.)

USING THE SYSTEM

APPENDIX

Update the system at [Updating the system]. (→ P. 28)

Connect the units and the PC used for settings to the network, and then turn them on.

(IP addresses are assigned to the IP client units by the DHCP server automatically.)

Search for the IP units (other than PC master stations) you will use in the system at [IP unit search] on the IP host unit, and open the setting window for each IP unit. (→ P. 17)

Make the [Network setting: Individual] settings on the IP client units. (→ P. 16)

*Set them as "Client unit" (if they are not set as "Client unit").

*Enter the IP address of the IP host unit.

*Select "DHCP" for acquiring IP addresses (if "DHCP" is not selected).

Update the system at [Updating the system]. (→ P. 28)

Confirm the [Network setting: Common] settings on the IP host unit. (→ P. 16)

*Confirm that the multicast addresses and/or port numbers do not overlap those of other manufacturer’s network devices connected to the same network.

Make the [Network setting: Individual] settings on the IP host unit. (→ P. 16)

*Set it as "Host unit".

*Set the static IP address to the IP host unit.

Update the system at [Updating the system]. (→ P. 28)

Add IP units you will use in the system at [IP unit registration] on the IP host unit. (→ P. 19)

If you will connect your site with remote sites, make the remote site connection settings. (→ P. 12)

Make the other system settings. (→ P. 17-28)

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Setting Manual Contents Purpose of the System Settings About this ManualManual configurations Title Sub title Sub item Setting range Default Setting ListDT1/DT2 NTP Call Priority From the chart below, then start the network settings by System Setting FlowGo to P First selectFlow All units Static IP addresses are set For the IP host unitFor each IP client unit Started Setting the System Using the System Procedure Remote site connection settingsWhen connecting a PC to the IP unit directly When connecting a PC to the IP unit via a hub switchSystem requirements for PC Connect a PC to the IP unitLog in to the system by setting the following items Turn on the power to the IP unitPassword Enter aiphone Go to the nextBasic setting procedure System Setting DetailsClick Network setting Common in the table Click Network setting Individual in the tableClose the window Repeat to 5 to make settings to other IP unitsRequired Registering zones System setting Zone registrationRegistering IP units System setting IP unit registration Click IP unit registration in the table of contentsCheck the boxes for the IP units you want to register How to select multiple stations Registering stations System setting Registering stationsCollective setting Other buttonsMaking detailed settings to door stations Basic setting procedureClick Advanced station settings in the table of contents When you have finished making all the detailed settingsSettings on Other window Making detailed settings to master stationsSettings on Stations to be scan monitored window About the priorityCheck to select the target stations Registering stations to zones System setting Zone settingClick Close after you have finished selecting the stations Click Registering daily transfer scheduleClick Transfer schedule setting in the table of contents Settings on Weekly schedule setting windowSettings on Individual schedule setting window Setting the timer Timer setting Settings on Remote site master call setting window Click Remote site pilot call setting in the tableSettings on Remote site door call setting window Settings on Remote site paging setting windowSetting time and date Time and date setting When downloading setting data onto the PC Downloading/uploading setting data Setting fileWhen uploading setting data Click Downloading setting data in the table of contentsMaintenance Setting Information Memo
Top Page Image Contents