Aiphone FK1629 B 0811YZ operation manual Setting time and date Time and date setting

Page 27

Video setting

1 Click Video setting in the table of contents.

2 Set the following settings for video quality.

•[Frame Rate]:

Set the frame rate selecting “1”, “2”, “5”, “7.5”, “10” or “15” fps from the pull-down menu.

•[Quality]:

Set the video quality selecting “Low”, “Middle”, “High” or “Excellent” from the pull-down menu.

3 Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

NOTE:

Raising [Frame Rate] from 1 to 15 fps gives you a smoother image quality. Also, raising [Quality] gives you a finer image. However, if both [Frame Rate] and [Quality] are raised at the same time, a large amount of network bandwidth will be required.

Setting time and date [Time and date setting]

Set the time and date of the system, used for transfer schedule.

1 Click Time and date setting in the table of contents.

2 Set the following settings.

•[Set current time] Required :

Set the current time and date in one of the following methods.

•Input the current time and date manually, and then click Manual setting .

•Click Synchronized with PC to set the current time and date by making it synchronized with the PC.

•You can also set the current time and date by making it

synchronized with NTP server [Synchronized with NTP server] as shown below.

*If there is no power supply to the system for a long time because of power failure etc., the time and date setting may be cleared.

•[NTP (Network Time Protocol)]:

Set [Synchronized with NTP server] to ON to set the current time and date by making it synchronized with NTP server. Then set the [NTP server] and [NTP port number].

*[NTP server]:

Enter the IP address or domain name of the NTP server to be used as the master clock.

•[UTC time zone]:

Set the time differences from Coordinated Universal Time (UTC). Set the [Hour difference] and [Minute difference] respectively.

•[Synchronize interval]:

When [Synchronized with NTP server] is set to ON, the current time and date are set by being synchronized with the NTP server with the entered time interval.

•[Daylight savings time]:

Set whether to utilize daylight savings time (ON) or (OFF). When set to ON, then set the start and end times (Month, Week of the month, Day of the week, Hour and Minute), and time differences (Hour and Minute).

*It is recommended to connect the system with a PC or NTP server constantly to keep the correct time and date setting.

3 Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM

APPENDIX

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Setting Manual Contents Purpose of the System Settings About this ManualManual configurations Title Sub title Sub item Setting range Default Setting ListDT1/DT2 NTP Call Priority First select System Setting FlowFrom the chart below, then start the network settings by Go to PFlow All units Static IP addresses are set For the IP host unitFor each IP client unit Started Setting the System Using the System Procedure Remote site connection settingsConnect a PC to the IP unit When connecting a PC to the IP unit via a hub switchWhen connecting a PC to the IP unit directly System requirements for PCGo to the next Turn on the power to the IP unitLog in to the system by setting the following items Password Enter aiphoneBasic setting procedure System Setting DetailsClick Network setting Common in the table Click Network setting Individual in the tableClose the window Repeat to 5 to make settings to other IP unitsRequired Registering zones System setting Zone registrationRegistering IP units System setting IP unit registration Click IP unit registration in the table of contentsCheck the boxes for the IP units you want to register Other buttons Registering stations System setting Registering stationsHow to select multiple stations Collective settingWhen you have finished making all the detailed settings Basic setting procedureMaking detailed settings to door stations Click Advanced station settings in the table of contentsAbout the priority Making detailed settings to master stationsSettings on Other window Settings on Stations to be scan monitored windowClick Registering daily transfer schedule Registering stations to zones System setting Zone settingCheck to select the target stations Click Close after you have finished selecting the stationsClick Transfer schedule setting in the table of contents Settings on Weekly schedule setting windowSettings on Individual schedule setting window Setting the timer Timer setting Settings on Remote site paging setting window Click Remote site pilot call setting in the tableSettings on Remote site master call setting window Settings on Remote site door call setting windowSetting time and date Time and date setting Click Downloading setting data in the table of contents Downloading/uploading setting data Setting fileWhen downloading setting data onto the PC When uploading setting dataMaintenance Setting Information Memo
Top Page Image Contents