Aiphone FK1629 B 0811YZ operation manual Registering stations to zones System setting Zone setting

Page 23

Registering stations to zones [System setting – Zone setting]

Assign stations to the registered zones.

1 Click Zone setting in the table of contents.

2 Select a zone from the pull-down menu.

3 Click Reference to display all the registered stations in your site.

Another window opens and the registered stations are displayed in the list.

4 Check to select the target stations.

Select stations in the following ways.

•Select stations by checking one by one.

•All stations of the same type can be selected by clicking the corresponding button under [Select all by type].

•By clicking the button on the top of the list, all the stations are checked or canceled.

5 Click Close after you have finished selecting the stations.

In the previous window, the selection results are displayed in the list.

*When canceling a registered station, check the station in the list, then click Delete .

6 Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

Registering daily transfer schedule [Transfer setting – Registering daily transfer schedule]

You can set the schedule for transferring calls to other master stations in your site or remote sites automatically. The schedules registered on this setting are used when making a transfer setting on a master station.

Up to 2 daily schedules can be registered.

1 Click Registering daily transfer schedule in the

table of contents.

2 [Schedule number]:

Select the schedule number DT1 or DT2 from the pull-down menu.

3 [Schedule name]:

Enter the name of daily schedule.

4 [Call transfer time]:

Set the [Start time (hour and minute)] and [End time (hour and minute)] of transferring.

5 Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM

APPENDIX

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Setting Manual Contents Manual configurations Purpose of the System SettingsAbout this Manual Title Sub title Sub item Setting range Default Setting ListDT1/DT2 NTP Call Priority First select System Setting FlowFrom the chart below, then start the network settings by Go to PFlow For each IP client unit All units Static IP addresses are setFor the IP host unit Started Setting the System Using the System Procedure Remote site connection settingsConnect a PC to the IP unit When connecting a PC to the IP unit via a hub switchWhen connecting a PC to the IP unit directly System requirements for PCGo to the next Turn on the power to the IP unitLog in to the system by setting the following items Password Enter aiphoneBasic setting procedure System Setting DetailsClick Network setting Common in the table Click Network setting Individual in the tableClose the window Repeat to 5 to make settings to other IP unitsRequired Registering zones System setting Zone registrationCheck the boxes for the IP units you want to register Registering IP units System setting IP unit registrationClick IP unit registration in the table of contents Other buttons Registering stations System setting Registering stationsHow to select multiple stations Collective settingWhen you have finished making all the detailed settings Basic setting procedureMaking detailed settings to door stations Click Advanced station settings in the table of contentsAbout the priority Making detailed settings to master stationsSettings on Other window Settings on Stations to be scan monitored windowClick Registering daily transfer schedule Registering stations to zones System setting Zone settingCheck to select the target stations Click Close after you have finished selecting the stationsSettings on Individual schedule setting window Click Transfer schedule setting in the table of contentsSettings on Weekly schedule setting window Setting the timer Timer setting Settings on Remote site paging setting window Click Remote site pilot call setting in the tableSettings on Remote site master call setting window Settings on Remote site door call setting windowSetting time and date Time and date setting Click Downloading setting data in the table of contents Downloading/uploading setting data Setting fileWhen downloading setting data onto the PC When uploading setting dataMaintenance Setting Information Memo
Top Page Image Contents