Aiphone FK1629 B 0811YZ Registering zones System setting Zone registration, Required

Page 18

Registering areas and remote sites [System setting – Area/Site registration]

Required

Register areas (for separating stations in your site) and/ or remote sites. The number to which a name is entered is registered as an area or site number. Up to 99 areas and/or sites (up to 31 for sites only) can be registered.

1 Click Area/Site registration in the table of contents.

2 Enter an area name in the cell for the area number 01.

*Be sure to enter an area name. A site cannot be registered to the number 01.

*The figures under “Number” in the tables means the area or site numbers.

3 Enter area and/or site names in the cells for other numbers to register more areas and/or sites.

•Select “Area” or “Site” from the pull-down menu of “Area/ Site”.

•For a site, enter the IP address (global IP address of the target site), port number and connection password for the target site.

•For a site, set “Door release” to enable (ON) or disable (OFF) the door release action from the target site.

4 Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

NOTES:

•Be sure to register at least one area to the area number 01. (“1” is entered in the cell for the area number 01 as default.)

•A call number displayed on the master station monitor consists of an area number plus a station number (when called from within your site).

Registering zones

[System setting – Zone registration]

Register zones for paging (transmitting announcements) in your site. The number to which a name is entered is registered as a zone number. Up to 99 zones can be registered.

*Zones are groups of stations designated for paging.

1 Click Zone registration in the table of contents.

2 Enter a zone name in the cell for the target zone number.

*The figures under "Number" in the table means the zone number.

3 Enter zone names in the cells for other numbers to register more zones.

4 Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Setting Manual Contents Purpose of the System Settings About this ManualManual configurations Setting List Title Sub title Sub item Setting range DefaultDT1/DT2 NTP Call Priority Go to P System Setting FlowFrom the chart below, then start the network settings by First selectFlow All units Static IP addresses are set For the IP host unitFor each IP client unit Started Setting the System Using the System Remote site connection settings ProcedureSystem requirements for PC When connecting a PC to the IP unit via a hub switchWhen connecting a PC to the IP unit directly Connect a PC to the IP unitPassword Enter aiphone Turn on the power to the IP unitLog in to the system by setting the following items Go to the nextSystem Setting Details Basic setting procedureClick Network setting Individual in the table Click Network setting Common in the tableRepeat to 5 to make settings to other IP units Close the windowRegistering zones System setting Zone registration RequiredRegistering IP units System setting IP unit registration Click IP unit registration in the table of contentsCheck the boxes for the IP units you want to register Collective setting Registering stations System setting Registering stationsHow to select multiple stations Other buttonsClick Advanced station settings in the table of contents Basic setting procedureMaking detailed settings to door stations When you have finished making all the detailed settingsSettings on Stations to be scan monitored window Making detailed settings to master stationsSettings on Other window About the priorityClick Close after you have finished selecting the stations Registering stations to zones System setting Zone settingCheck to select the target stations Click Registering daily transfer scheduleClick Transfer schedule setting in the table of contents Settings on Weekly schedule setting windowSettings on Individual schedule setting window Setting the timer Timer setting Settings on Remote site door call setting window Click Remote site pilot call setting in the tableSettings on Remote site master call setting window Settings on Remote site paging setting windowSetting time and date Time and date setting When uploading setting data Downloading/uploading setting data Setting fileWhen downloading setting data onto the PC Click Downloading setting data in the table of contentsMaintenance Setting Information Memo
Top Page Image Contents