Aiphone FK1629 B 0811YZ operation manual Started Setting the System Using the System

Page 11

Flow 3

(All units: IP addresses are assigned by the DHCP server automatically)

* This is the outline of setting ﬂow. Also make the detailed settings on each setting window referring to the corresponding pages.

GETTING

START

Write down the MAC addresses of all the IP units to be used in the system in advance by using the “Setting Information Memo” (→P. 30) etc.

*The MAC address is labeled on each unit.

Set the router (or DHCP server) so that it assigns a static IP address to the IP unit to be used as the IP host unit.

Connect the units and the PC used for settings to the network, and then turn them on.

Access the IP address assigned to the IP host unit from the browser on the PC. (→P. 14)

:Settings on the IP host unit

:Settings on the IP client units

STARTED SETTING THE SYSTEM USING THE SYSTEM

(Log in.)

Make the [Network setting: Individual] settings on the IP host unit. (→ P. 16)

*Set it as "Host unit".

*Select "DHCP" for acquiring an IP address.

Update the system at [Updating the system]. (→ P. 28)

Search for the IP units (other than PC master stations) you will use in the system at [IP unit search] on the IP host unit, and open the setting window for each IP unit. (→ P. 17)

Make the [Network setting: Individual] settings on the IP client units respectively. (→ P. 16)

*Set them as "Client unit" (if they are not set as "Client unit").

*Enter the IP address of the IP host unit.

*Select "DHCP" for acquiring IP addresses (if "DHCP" is not selected).

Conﬁrm the [Network setting: Common] settings on the IP host unit. (→ P. 16)

*Conﬁrm that the multicast addresses and/or port numbers do not overlap those of other manufacturer’s network devices connected to the same network.

Add IP units you will use in the system at [IP unit registration] on the IP host unit. (→ P. 19)

If you will connect your site with remote sites, make the remote site connection settings. (→ P. 12)

APPENDIX

Update the system at [Updating the system]. (→ P. 28)		Make the other system settings. (→ P. 17-28)

11

Image 11

Contents Setting Manual Contents Manual conﬁgurations Purpose of the System SettingsAbout this Manual Title Sub title Sub item Setting range Default Setting ListDT1/DT2 NTP Call Priority First select System Setting FlowFrom the chart below, then start the network settings by Go to PFlow For each IP client unit All units Static IP addresses are setFor the IP host unit Started Setting the System Using the System Procedure Remote site connection settingsConnect a PC to the IP unit When connecting a PC to the IP unit via a hub switchWhen connecting a PC to the IP unit directly System requirements for PCGo to the next Turn on the power to the IP unitLog in to the system by setting the following items Password Enter aiphoneBasic setting procedure System Setting DetailsClick Network setting Common in the table Click Network setting Individual in the tableClose the window Repeat to 5 to make settings to other IP unitsRequired Registering zones System setting Zone registrationCheck the boxes for the IP units you want to register Registering IP units System setting IP unit registrationClick IP unit registration in the table of contents Other buttons Registering stations System setting Registering stationsHow to select multiple stations Collective settingWhen you have ﬁnished making all the detailed settings Basic setting procedureMaking detailed settings to door stations Click Advanced station settings in the table of contentsAbout the priority Making detailed settings to master stationsSettings on Other window Settings on Stations to be scan monitored windowClick Registering daily transfer schedule Registering stations to zones System setting Zone settingCheck to select the target stations Click Close after you have ﬁnished selecting the stationsSettings on Individual schedule setting window Click Transfer schedule setting in the table of contentsSettings on Weekly schedule setting window Setting the timer Timer setting Settings on Remote site paging setting window Click Remote site pilot call setting in the tableSettings on Remote site master call setting window Settings on Remote site door call setting windowSetting time and date Time and date setting Click Downloading setting data in the table of contents Downloading/uploading setting data Setting ﬁleWhen downloading setting data onto the PC When uploading setting dataMaintenance Setting Information Memo