Aiphone FK1629 B 0811YZ operation manual Remote site connection settings, Procedure

Page 12

Remote site connection settings

You need to make the remote site connection settings to enable communication between your site and remote sites. Make the settings by following the procedure below after the network settings for your site have ﬁnished.

* This is the outline of setting ﬂow. Also make the detailed settings on each setting window referring to the corresponding pages.

Procedure

Complete the network settings for your site by following

Flow 1 , Flow 2 or Flow 3 . (→P. 9-11)

Get the following information for the remote sites you will connect with your site.

"Global IP address" "Connection port: global" "Connection Password"

Set the following setting items on the IP host unit. (→ P. 16)

[Network setting: Individual] :

"Default Gateway"

[Network setting: Common] :

"UPnP"

"Global IP address" "Audio/video port"

Make the [Area/Site registration] on the IP host unit. (→ P. 18)

*Select "Site" with the "Area/Site" pull-down menu and enter the information of the site you will connect.

Update the system at [Updating the system]. (→ P. 28)

Open the [IP unit registration] window on the IP host unit, and then click the Port forwarding setting button. (→ P. 19)

*Another window opens and the port forwarding setting contents are displayed.

Set the router with the port forwarding setting contents you conﬁrmed in the previous step.

:Settings on the IP host unit

:Required when [UPnP] is set to OFF at [Network setting: Common] (→ P. 16)

12

Image 12

Contents Setting Manual Contents Purpose of the System Settings About this ManualManual conﬁgurations Setting List Title Sub title Sub item Setting range DefaultDT1/DT2 NTP Call Priority System Setting Flow From the chart below, then start the network settings byGo to P First selectFlow All units Static IP addresses are set For the IP host unitFor each IP client unit Started Setting the System Using the System Remote site connection settings ProcedureWhen connecting a PC to the IP unit via a hub switch When connecting a PC to the IP unit directlySystem requirements for PC Connect a PC to the IP unitTurn on the power to the IP unit Log in to the system by setting the following itemsPassword Enter aiphone Go to the nextSystem Setting Details Basic setting procedureClick Network setting Individual in the table Click Network setting Common in the tableRepeat to 5 to make settings to other IP units Close the windowRegistering zones System setting Zone registration RequiredRegistering IP units System setting IP unit registration Click IP unit registration in the table of contentsCheck the boxes for the IP units you want to register Registering stations System setting Registering stations How to select multiple stationsCollective setting Other buttonsBasic setting procedure Making detailed settings to door stationsClick Advanced station settings in the table of contents When you have ﬁnished making all the detailed settingsMaking detailed settings to master stations Settings on Other windowSettings on Stations to be scan monitored window About the priorityRegistering stations to zones System setting Zone setting Check to select the target stationsClick Close after you have ﬁnished selecting the stations Click Registering daily transfer scheduleClick Transfer schedule setting in the table of contents Settings on Weekly schedule setting windowSettings on Individual schedule setting window Setting the timer Timer setting Click Remote site pilot call setting in the table Settings on Remote site master call setting windowSettings on Remote site door call setting window Settings on Remote site paging setting windowSetting time and date Time and date setting Downloading/uploading setting data Setting ﬁle When downloading setting data onto the PCWhen uploading setting data Click Downloading setting data in the table of contentsMaintenance Setting Information Memo