Aiphone FK1629 B 0811YZ Close the window, Repeat to 5 to make settings to other IP units

Page 17

Setting the administrator ID and password [Administrator setting]

We recommend that you change the administrator ID and password from default to unique ones for security purposes.

*This setting can be made to each of the IP units in your site.

*“aiphone” is preset as the default for both ID and password.

1 Click Administrator setting in the table of contents.

2 Make the settings on the following items displayed in the setting window.

•[New administrator ID]: Enter the new ID.

•[Current Password]: Enter the current password.

•[New Password]: Enter a new password.

•[New Password (Re-type)]: Enter the new password again.

3 Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

NOTE:

The system administrator must keep the ID and password without fail. If you forget the ID and password, you must initialize the unit, thus all the setting contents return to default.

Confirming the IP units connected to the system [IP unit search]

Before configuring system wide settings, confirm the IP units are connected to the network, and set the network setting for each IP unit using [IP unit search].

1 Click IP unit search in the table of contents.

2 Click IP unit search .

All the IP units connected to the system are displayed in the list.

*If IP units are not displayed, repeat this step until displayed.

3 Confirm the “Station type”, “MAC address” and “Unit name” of the IP units in the list.

4 To make or change settings to an IP unit, check the box for the target IP unit and click

Open the setting window .

Another window opens. You can make settings for the target IP unit individually. (→P. 16)

5 Close the window.

*Repeat step 3 to 5 to make settings to other IP units.

NOTES:

•This procedure cannot search for PC master stations (IS-SOFT) and it is not a system failure. To add a PC master station (IS-SOFT) in the system, install the application (IS-SOFT) to a PC before connecting it to the network and see page 19.

•It may be required to log in to open the setting window, and update the system at [Updating the system] before closing the window.

GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM

APPENDIX

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Setting Manual Contents Manual configurations Purpose of the System SettingsAbout this Manual Title Sub title Sub item Setting range Default Setting ListDT1/DT2 NTP Call Priority From the chart below, then start the network settings by System Setting FlowGo to P First selectFlow For each IP client unit All units Static IP addresses are setFor the IP host unit Started Setting the System Using the System Procedure Remote site connection settingsWhen connecting a PC to the IP unit directly When connecting a PC to the IP unit via a hub switchSystem requirements for PC Connect a PC to the IP unitLog in to the system by setting the following items Turn on the power to the IP unitPassword Enter aiphone Go to the nextBasic setting procedure System Setting DetailsClick Network setting Common in the table Click Network setting Individual in the tableClose the window Repeat to 5 to make settings to other IP unitsRequired Registering zones System setting Zone registrationCheck the boxes for the IP units you want to register Registering IP units System setting IP unit registrationClick IP unit registration in the table of contents How to select multiple stations Registering stations System setting Registering stationsCollective setting Other buttonsMaking detailed settings to door stations Basic setting procedureClick Advanced station settings in the table of contents When you have finished making all the detailed settingsSettings on Other window Making detailed settings to master stationsSettings on Stations to be scan monitored window About the priorityCheck to select the target stations Registering stations to zones System setting Zone settingClick Close after you have finished selecting the stations Click Registering daily transfer scheduleSettings on Individual schedule setting window Click Transfer schedule setting in the table of contentsSettings on Weekly schedule setting window Setting the timer Timer setting Settings on Remote site master call setting window Click Remote site pilot call setting in the tableSettings on Remote site door call setting window Settings on Remote site paging setting windowSetting time and date Time and date setting When downloading setting data onto the PC Downloading/uploading setting data Setting fileWhen uploading setting data Click Downloading setting data in the table of contentsMaintenance Setting Information Memo
Top Page Image Contents