Aiphone FK1629 B 0811YZ operation manual Click Network setting Individual in the table

Page 16

The following shows the setting procedure for the items of each title.

Refer to “SETTING LIST” (→P. 4-7) for details about the settings. Make the settings by also referring to the on-screen instructions.

Making network settings to each IP unit [Network setting: Individual]

Make the settings for network to each IP unit connected to the system according to your requirements.

1 Click Network setting: Individual in the table of

contents.

2 Make the settings on the following items displayed in the setting window.

•[Host unit setting]:

Set this unit as either “Host unit” or “Client unit”. When set to “Client unit”, also enter the IP address of the IP host unit.

•[System name]: Required

When “Host unit” is selected at [Host unit setting], it is required to enter a name for this system.

Selecting the network setting method

Set a (static) IP address to this unit. Select the method for acquiring a (static) IP address between [DHCP] and [Static IP Address].

•[DHCP]:

Check this when you will acquire an IP address with DHCP.

*A DHCP server (or a router) is required to acquire an IP address with DHCP. A router may not have the setup function depending on some models. For information about setting a router, see the instruction manual for the router.

•[Static IP Address]:

Check this when you set the static IP address manually, and then enter the static IP address suitable for the network you are using, subnet mask, etc.

*It is required to enter the static IP address and subnet mask.

•[Unit name]:

Enter a name for this unit.

*This name is used for searching for this unit in the network. If not named, this unit is recognized only by the unit (station) type and MAC address.

•[Connection port], [Connection Password]: Required Enter the port number for controlling communication and the password for security. Use the same port number and password among the IP host unit and IP client units within the site.

NOTES:

•The IP host unit must not have an IP address identical to the IP address of a remote site’s IP host unit.

•The items that cannot be entered or selected are grayed out.

3 Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

16

4 When the settings on this window have finished, update the system from [Updating the system]. (→P. 28)

Making network settings for the whole system [Network setting: Common]

Make the network settings for the whole system on the web browser of the IP host unit.

1 Click Network setting: Common in the table of

contents.

2 Make the settings on the following items displayed in the setting window.

•[UPnP]:

If you do not use UPnP, set [UPnP] to OFF.

•[Global IP address]:

When [UPnP] is set to OFF, enter the static global IP address of the router for use in your site.

•[Multicast address 1 – 5]: Required

Enter the multicast addresses for the following:

1:For sound communication for paging between sites

2:For sound communication for paging in your site

3:(Not available)

4:For video communication in your site

5:For video communication between sites

*Do not use multicast addresses that overlap those of other devices connected to the same network.

•[Audio/video port]: Required

Enter the port numbers used for audio and video communication.

*Do not use port numbers that overlap those of other devices connected to the same network.

3 Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Setting Manual Contents About this Manual Purpose of the System SettingsManual configurations Setting List Title Sub title Sub item Setting range DefaultDT1/DT2 NTP Call Priority System Setting Flow From the chart below, then start the network settings byGo to P First selectFlow For the IP host unit All units Static IP addresses are setFor each IP client unit Started Setting the System Using the System Remote site connection settings ProcedureWhen connecting a PC to the IP unit via a hub switch When connecting a PC to the IP unit directlySystem requirements for PC Connect a PC to the IP unitTurn on the power to the IP unit Log in to the system by setting the following itemsPassword Enter aiphone Go to the nextSystem Setting Details Basic setting procedureClick Network setting Individual in the table Click Network setting Common in the tableRepeat to 5 to make settings to other IP units Close the windowRegistering zones System setting Zone registration RequiredClick IP unit registration in the table of contents Registering IP units System setting IP unit registrationCheck the boxes for the IP units you want to register Registering stations System setting Registering stations How to select multiple stationsCollective setting Other buttonsBasic setting procedure Making detailed settings to door stationsClick Advanced station settings in the table of contents When you have finished making all the detailed settingsMaking detailed settings to master stations Settings on Other windowSettings on Stations to be scan monitored window About the priorityRegistering stations to zones System setting Zone setting Check to select the target stationsClick Close after you have finished selecting the stations Click Registering daily transfer scheduleSettings on Weekly schedule setting window Click Transfer schedule setting in the table of contentsSettings on Individual schedule setting window Setting the timer Timer setting Click Remote site pilot call setting in the table Settings on Remote site master call setting windowSettings on Remote site door call setting window Settings on Remote site paging setting windowSetting time and date Time and date setting Downloading/uploading setting data Setting file When downloading setting data onto the PCWhen uploading setting data Click Downloading setting data in the table of contentsMaintenance Setting Information Memo
Top Page Image Contents