Aiphone FK1629 B 0811YZ Making detailed settings to master stations, Settings on Other window

Page 22

BSettings on [Other] window

•[Transmit volume boost at PTT]:

Select whether to increase the press-to-talk sound volume transmitted to the stations (ON) or not (OFF).

•[Camera zoom image preset]:

Select the default of camera’s Zoom/Wide function at calling from the 9 zoom positions and "0" (wide) from the pull-down menu.

•[Call acknowledge tone on/off]:

Select whether to sound the call acknowledge tone of door station (ON) or not (OFF).

•[Backlight adjustment]:

Select the method of adjusting the backlight in the daytime between “Exposure +” and “Exposure –”.

•Close

Click this to close the current window and return to the previous window.

About the priority

The order of priority for actions (communication, calling, paging, monitoring, etc.) is as follows depending on the priority setting.

Priority	Setting	Action
1 (high)	[Urgent], [Broadcast]	Communication, calling,
2	[Priority]	paging

3[Normal]

4 (low)

-

Monitoring, scan-monitoring

Making detailed settings to master stations

The following setting item buttons are displayed in the “Advanced settings” window.

C

D

*Click either the button C or D to open the corresponding setting window, and then make the settings in the displayed window(s). See the detailed

instructions for C or D below.

*Click Close to close the current window and return to the previous window.

CSettings on [Stations to be scan monitored] window

Set the scan-monitoring target sub station(s).

*Up to 20 sub stations in your site can be set.

1Click Reference to open another window, then select the target stations, and then click Close to return to the previous window.

The selected stations are added and displayed in the list.

*To delete a station (or stations) from the list, check the target station(s) in the list and click Delete .

2Repeat step 1 to register more stations.

3Click Close to close the current window and return to the previous window.

DSettings on [Other] window

•[Master station function: paging, chime, monitor, door release, and remote site call]:

Select whether to enable the following functions of master station (ON) or not (OFF).

•Starting paging

•Starting chime paging (Not available)

•Monitoring/scan-monitoring

•Releasing door

•Remote site call

•Close

Click this to close the current window and return to the previous window.

22

Image 22

Contents Setting Manual Contents About this Manual Purpose of the System SettingsManual conﬁgurations Setting List Title Sub title Sub item Setting range DefaultDT1/DT2 NTP Call Priority Go to P System Setting FlowFrom the chart below, then start the network settings by First selectFlow For the IP host unit All units Static IP addresses are setFor each IP client unit Started Setting the System Using the System Remote site connection settings ProcedureSystem requirements for PC When connecting a PC to the IP unit via a hub switchWhen connecting a PC to the IP unit directly Connect a PC to the IP unitPassword Enter aiphone Turn on the power to the IP unitLog in to the system by setting the following items Go to the nextSystem Setting Details Basic setting procedureClick Network setting Individual in the table Click Network setting Common in the tableRepeat to 5 to make settings to other IP units Close the windowRegistering zones System setting Zone registration RequiredClick IP unit registration in the table of contents Registering IP units System setting IP unit registrationCheck the boxes for the IP units you want to register Collective setting Registering stations System setting Registering stationsHow to select multiple stations Other buttonsClick Advanced station settings in the table of contents Basic setting procedureMaking detailed settings to door stations When you have ﬁnished making all the detailed settingsSettings on Stations to be scan monitored window Making detailed settings to master stationsSettings on Other window About the priorityClick Close after you have ﬁnished selecting the stations Registering stations to zones System setting Zone settingCheck to select the target stations Click Registering daily transfer scheduleSettings on Weekly schedule setting window Click Transfer schedule setting in the table of contentsSettings on Individual schedule setting window Setting the timer Timer setting Settings on Remote site door call setting window Click Remote site pilot call setting in the tableSettings on Remote site master call setting window Settings on Remote site paging setting windowSetting time and date Time and date setting When uploading setting data Downloading/uploading setting data Setting ﬁleWhen downloading setting data onto the PC Click Downloading setting data in the table of contentsMaintenance Setting Information Memo