Aiphone FK1629 B 0811YZ Basic setting procedure, Making detailed settings to door stations

Page 21

Making detailed settings to stations [System setting – Advanced station settings]

Make detailed settings for the registered stations. The settings can be made to a station individually, or multiple stations of the same type at a time. The setting items differ from the station type. First select a station (or stations), and then open the “Advanced settings” window to make the settings.

Basic setting procedure

Click Advanced station settings in the table of contents.

Click to check the station(s) where detailed settings are to be made.

*Multiple stations of the same type can be set together.

*All stations of the same type can be selected by clicking the corresponding button under [Select all by type].

Click Advanced settings .

The “Advanced settings” window for the selected station type opens.

Make the settings in the displayed windows.

For door stations

The right column of this page

For master stations

P.22

When you have finished making all the detailed settings:

Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

Making detailed settings to door stations

The following setting item buttons are displayed in the “Advanced settings” window.

A

B

*Click either the button A or B to open the corresponding setting window, and then make the settings in the displayed window(s). See the detailed

instructions for A or B below.

*Click Close to close the current window and return to the previous window.

ASettings on [Called stations] setting window

Set the master station(s) in your site and/or a remote site that is (are) to be called from the selected station(s).

*Up to 20 master stations in your site can be set. Or up to 19 master stations in your site and a remote site (up to 20 master stations are to be set at the remote site) can be set.

1 Select the “Call priority” from the pull-down menu.

2 Click Reference to open another window, then check the target master stations, and then click Close to return to the previous window.

The selected master stations are added and displayed in the list.

*Click Remote sites to open another window for selecting the remote site as the target to be called from the selected station(s).

*To delete a station (or stations) and/or remote site from the list, check the targets in the list and click Delete .

3 Repeat step 2 to add more master stations.

4 Click Close to close the current window and return to the previous window.

GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM

APPENDIX

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Setting Manual Contents Purpose of the System Settings About this ManualManual configurations Title Sub title Sub item Setting range Default Setting ListDT1/DT2 NTP Call Priority From the chart below, then start the network settings by System Setting FlowGo to P First selectFlow All units Static IP addresses are set For the IP host unitFor each IP client unit Started Setting the System Using the System Procedure Remote site connection settingsWhen connecting a PC to the IP unit directly When connecting a PC to the IP unit via a hub switchSystem requirements for PC Connect a PC to the IP unitLog in to the system by setting the following items Turn on the power to the IP unitPassword Enter aiphone Go to the nextBasic setting procedure System Setting DetailsClick Network setting Common in the table Click Network setting Individual in the tableClose the window Repeat to 5 to make settings to other IP unitsRequired Registering zones System setting Zone registrationRegistering IP units System setting IP unit registration Click IP unit registration in the table of contentsCheck the boxes for the IP units you want to register How to select multiple stations Registering stations System setting Registering stationsCollective setting Other buttonsMaking detailed settings to door stations Basic setting procedureClick Advanced station settings in the table of contents When you have finished making all the detailed settingsSettings on Other window Making detailed settings to master stationsSettings on Stations to be scan monitored window About the priorityCheck to select the target stations Registering stations to zones System setting Zone settingClick Close after you have finished selecting the stations Click Registering daily transfer scheduleClick Transfer schedule setting in the table of contents Settings on Weekly schedule setting windowSettings on Individual schedule setting window Setting the timer Timer setting Settings on Remote site master call setting window Click Remote site pilot call setting in the tableSettings on Remote site door call setting window Settings on Remote site paging setting windowSetting time and date Time and date setting When downloading setting data onto the PC Downloading/uploading setting data Setting fileWhen uploading setting data Click Downloading setting data in the table of contentsMaintenance Setting Information Memo
Top Page Image Contents