Aiphone FK1629 B 0811YZ About this Manual, Purpose of the System Settings, Manual conﬁgurations

Page 3

ABOUT THIS MANUAL

The IS system provides various manuals to meet various system planning and work processes. Use the manuals necessary for your system.

Manual conﬁgurations

The following manuals are provided for a network direct system. Read all the manuals for installing, setting up, and using a network direct system, or provide the manuals to the persons working with the system.

INSTALLATION MANUAL (A booklet included with the IP master station (IS-IPMV))

Used for installing and connecting IP master stations and IP video door stations. (For an installer or serviceman)

SETTING MANUAL (This manual on the CD-ROM included with the IP master station (IS-IPMV))

This manual describes how to make the system settings and system maintenance. (For an installer or serviceman)

OPERATION MANUAL (An electronic manual on the CD-ROM included with the IP master station (IS-IPMV))

Information for using the system for calling, communicating, paging, monitoring, etc. (For users of the system)

Note the following:

•This manual describes how to make the system settings for a network direct system (without an IP control unit) only. For a standard (IP) system (including one or more IP control units), refer to the “SETTING MANUAL” for the standard (IP) system.

•Master stations and door stations that can be used in a network direct system are IP units (IS-IPMV, IS-IPDV, IS-IPDVF and IS- SOFT) only.

•PC master stations (IS-SOFT) can also be used in a network direct system. For setting a PC master stations (IS-SOFT), refer to the “SETTING MANUAL” for the PC master station (IS-SOFT).

PURPOSE OF THE SYSTEM SETTINGS

Conﬁgure the system settings based on how your system is planned to be used. System settings must be completed before the system will operate.

CAUTION:

Make the settings correctly. If the settings are not made correctly, the system will not function as planned.

GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM

APPENDIX

3

Image 3

Contents Setting Manual Contents Purpose of the System Settings About this ManualManual conﬁgurations Title Sub title Sub item Setting range Default Setting ListDT1/DT2 NTP Call Priority First select System Setting FlowFrom the chart below, then start the network settings by Go to PFlow All units Static IP addresses are set For the IP host unitFor each IP client unit Started Setting the System Using the System Procedure Remote site connection settingsConnect a PC to the IP unit When connecting a PC to the IP unit via a hub switchWhen connecting a PC to the IP unit directly System requirements for PCGo to the next Turn on the power to the IP unitLog in to the system by setting the following items Password Enter aiphoneBasic setting procedure System Setting DetailsClick Network setting Common in the table Click Network setting Individual in the tableClose the window Repeat to 5 to make settings to other IP unitsRequired Registering zones System setting Zone registrationRegistering IP units System setting IP unit registration Click IP unit registration in the table of contentsCheck the boxes for the IP units you want to register Other buttons Registering stations System setting Registering stationsHow to select multiple stations Collective settingWhen you have ﬁnished making all the detailed settings Basic setting procedureMaking detailed settings to door stations Click Advanced station settings in the table of contentsAbout the priority Making detailed settings to master stationsSettings on Other window Settings on Stations to be scan monitored windowClick Registering daily transfer schedule Registering stations to zones System setting Zone settingCheck to select the target stations Click Close after you have ﬁnished selecting the stationsClick Transfer schedule setting in the table of contents Settings on Weekly schedule setting windowSettings on Individual schedule setting window Setting the timer Timer setting Settings on Remote site paging setting window Click Remote site pilot call setting in the tableSettings on Remote site master call setting window Settings on Remote site door call setting windowSetting time and date Time and date setting Click Downloading setting data in the table of contents Downloading/uploading setting data Setting ﬁleWhen downloading setting data onto the PC When uploading setting dataMaintenance Setting Information Memo