Aiphone FK1629 B 0811YZ operation manual Registering IP units System setting IP unit registration

Page 19

Registering IP units [System setting – IP unit registration]

Register IP units by selecting from the connected ones to the system.

*To register a PC master station, ﬁrst install the application (IS-SOFT) to a PC, then connect the PC to the network and then start IS-SOFT.

1 Click IP unit registration in the table of contents.

2 Click IP unit search .

All the IP units connected to the system are displayed in the [Search result] on the lower side of the window.

*If IP units are not displayed, repeat this step until displayed.

3 Check the boxes for the IP units you want to register,

and then click Add to the imported IP units list . The checked IP units are registered and displayed in [Imported IP units list] on the upper side of the window.

4 Enter data or change settings for the registered IP units as needed.

*For "Port number", the sequential numbers are automatically assigned as needed. (You can also enter port numbers manually.)

*Do not use port numbers that overlap those of other devices connected to the same network.

•Port number auto-setting :

Click this to assign sequential port numbers automatically.

•Port forwarding setting :

Click this and you can conﬁrm the port forwarding settings to be made on the router in another window.

*If [UPnP] is set to OFF at [Network setting: Common], make the port forwarding setting on the router with the set contents in this window manually.

*Click Reload on this window to update the current port forward setting, and click Close to close this window.

5 Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

NOTE:

A PC master station must be also registered as an IP unit. First install the application (IS-SOFT) to a PC, then connect the PC to the network and then register it.

GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM

APPENDIX

19

Image 19

Contents Setting Manual Contents About this Manual Purpose of the System SettingsManual conﬁgurations Title Sub title Sub item Setting range Default Setting ListDT1/DT2 NTP Call Priority First select System Setting FlowFrom the chart below, then start the network settings by Go to PFlow For the IP host unit All units Static IP addresses are setFor each IP client unit Started Setting the System Using the System Procedure Remote site connection settingsConnect a PC to the IP unit When connecting a PC to the IP unit via a hub switchWhen connecting a PC to the IP unit directly System requirements for PCGo to the next Turn on the power to the IP unitLog in to the system by setting the following items Password Enter aiphoneBasic setting procedure System Setting DetailsClick Network setting Common in the table Click Network setting Individual in the tableClose the window Repeat to 5 to make settings to other IP unitsRequired Registering zones System setting Zone registrationClick IP unit registration in the table of contents Registering IP units System setting IP unit registrationCheck the boxes for the IP units you want to register Other buttons Registering stations System setting Registering stationsHow to select multiple stations Collective settingWhen you have ﬁnished making all the detailed settings Basic setting procedureMaking detailed settings to door stations Click Advanced station settings in the table of contentsAbout the priority Making detailed settings to master stationsSettings on Other window Settings on Stations to be scan monitored windowClick Registering daily transfer schedule Registering stations to zones System setting Zone settingCheck to select the target stations Click Close after you have ﬁnished selecting the stationsSettings on Weekly schedule setting window Click Transfer schedule setting in the table of contentsSettings on Individual schedule setting window Setting the timer Timer setting Settings on Remote site paging setting window Click Remote site pilot call setting in the tableSettings on Remote site master call setting window Settings on Remote site door call setting windowSetting time and date Time and date setting Click Downloading setting data in the table of contents Downloading/uploading setting data Setting ﬁleWhen downloading setting data onto the PC When uploading setting dataMaintenance Setting Information Memo