Aiphone FK1629 B 0811YZ operation manual Click Transfer schedule setting in the table of contents

Page 24

Setting transfer schedule

[Transfer setting – Transfer schedule setting]

You can set a weekly transfer schedule and individual daily schedule.

*The settings can be made 1 year ahead.

1 Click Transfer schedule setting in the table of contents.

2 Make the settings by clicking Weekly schedule and Individual schedule respectively to open the corresponding window.

E

F

*Individual schedule should be clicked after the target date is clicked on the calendar.

3 Make the settings in the displayed window(s).

See the detailed instructions for E or F on the right column of this page.

4 After the setting is finished on the corresponding window, click Close to close the window.

Calendar and setting status can be checked for the selected month.

The registered daily transfer schedules are identified by colors and shown on the calendar.

5

Click

 

to save the current setting

Temporarily stored

 

results temporarily.

 

* If you wish to cancel the setting results you have made,

 

click a title in the table of contents or “Refresh” in the

 

web browser menu.

6

When the settings on this window have finished, update

 

the system from [Updating the system]. (→P. 28)

ESettings on [Weekly schedule] setting window

1)Select either [Every week] or [Every other week].

2)Set the schedule start and end dates.

*The monthly calendar is displayed by clicking

Refer calendar and you can select the start and end dates.

*If necessary, you can change the month by clicking

or .

3)Set one of the registered daily transfer schedules or no schedule to each day of the week. (Select one from the pull-down menu.)

FSettings on [Individual schedule] setting window

Set an individual schedule to the target date.

*[Individual schedule] setting window will not open if you have not selected the target date on the calendar in the [Transfer schedule setting] window.

1)If necessary, you can change the date by clicking or repeatedly.

2)[Daily transfer schedule]:

Select either of the registered daily schedules (DT1 or DT2) or no schedule from the pull-down menu.

3)[Call transfer time]:

•When “DT1” or “DT2” is selected:

The call transfer time is automatically entered. If necessary, change the [Start time (hour and minute)] and [End time (hour and minute)] of transferring manually.

•When no schedule is selected: Enter the call transfer time manually.

*When the time is entered or changed manually, [Daily transfer schedule] changes to “Individual schedule”.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Setting Manual Contents Purpose of the System Settings About this ManualManual configurations Setting List Title Sub title Sub item Setting range DefaultDT1/DT2 NTP Call Priority System Setting Flow From the chart below, then start the network settings byGo to P First selectFlow All units Static IP addresses are set For the IP host unitFor each IP client unit Started Setting the System Using the System Remote site connection settings ProcedureWhen connecting a PC to the IP unit via a hub switch When connecting a PC to the IP unit directlySystem requirements for PC Connect a PC to the IP unitTurn on the power to the IP unit Log in to the system by setting the following itemsPassword Enter aiphone Go to the nextSystem Setting Details Basic setting procedureClick Network setting Individual in the table Click Network setting Common in the tableRepeat to 5 to make settings to other IP units Close the windowRegistering zones System setting Zone registration RequiredRegistering IP units System setting IP unit registration Click IP unit registration in the table of contentsCheck the boxes for the IP units you want to register Registering stations System setting Registering stations How to select multiple stationsCollective setting Other buttonsBasic setting procedure Making detailed settings to door stationsClick Advanced station settings in the table of contents When you have finished making all the detailed settingsMaking detailed settings to master stations Settings on Other windowSettings on Stations to be scan monitored window About the priorityRegistering stations to zones System setting Zone setting Check to select the target stationsClick Close after you have finished selecting the stations Click Registering daily transfer scheduleClick Transfer schedule setting in the table of contents Settings on Weekly schedule setting windowSettings on Individual schedule setting window Setting the timer Timer setting Click Remote site pilot call setting in the table Settings on Remote site master call setting windowSettings on Remote site door call setting window Settings on Remote site paging setting windowSetting time and date Time and date setting Downloading/uploading setting data Setting file When downloading setting data onto the PCWhen uploading setting data Click Downloading setting data in the table of contentsMaintenance Setting Information Memo
Top Page Image Contents