02-2322_EN 6/20/06 11:20 AM Page 02
The triangular symbol with the
lightning Bolt warns the user to the presence of dangerous
WARNING
DANGER OF A HAZARDOUS ELECTRIC
SHOCK. DO NOT OPEN
WARNING: TO REDUCE THE RISK OF AN ELECTRIC SHOCK, DO NOT REMOVE THE FRONT OR BACK COVER. INSIDE THE UNIT, THERE ARE NO PARTS THAT CAN BE REPAIRED OR ADJUSTED BY THE USER. PLEASE REFER TO QUALIFIED TECHNICIANS.
The triangular symbol with the exclamation highlights important points of which the user should refer to the manual regarding maintenance and repair.
SAFETY PRECAUTION
This appliance must be disconnected from the mains when not in use. Do not allow this appliance to be exposed to rain or moisture.
CAUTION : To reduce the risk of electric shock, do not remove cover (or back). No
CLASS 1
LASER PRODUCT
CAUTION !
Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam.
SAFETY INSTRUCTIONS
1.READ INSTRUCTIONS – All the safety and operating instructions should be read before the appliance is operated.
2.RETAIN INSTRUCTIONS – The safety and operating instruction should be retained for future reference.
3.HEED WARNINGS – All warnings on the appliance and in the operating instructions should be adhered to
.
4.FOLLOW INSTRUCTIONS – All operating and use instructions should be followed.
5.WATER AND MOISTURE – The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
6.VENTILATION – The appliance should be situated so that its location or position does not interfere with its proper ventilation, for example, the appliance should not be situated on a bed, sofa , rug or similar surface that may block the ventilation openings; Do not place in
7.HEAT – The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliance (including amplifiers) that produce heat.
8.POWER SOURCES – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
9.GROUNDING AND POLARISATION – Precautions should be taken to ensure that the grounding or polarisation means of the appliance are not defeated.
10.POWER CORD PROTECTION – Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the appliance.
012.