Haier ESA405K manual Temperature, Timer Delay, To clear Timer delay program

Temperature

ʄPress the TEMP/TIME up arrow button to raise the temperature. Each time you press or hold the TEMP/TIME up arrow button, the temperature will go up 1ºF until it reaches 86°F (30°C).

NOTE: After 5 seconds, the display will show the current room temperature.

TEMP / TIME

ʄPress the TEMP/TIME down arrow button to lower the temperature. Each time you press or hold the TEMP/TIME down arrow button, the temperature will go down 1ºF until it reaches 61°F (16°C).

NOTE: After 5 seconds, the display will show the current room temperature.

Timer Delay

To set the Timer for a 1-hour to 24-hour delay until the air conditioner turns off (the air conditioner must be On):

3UHVV7,0(57LPHU2))LQGLFDWRUOLJKWZLOOÀDVK'LVSOD\ZLOO

show remaining hours before the air conditioner will turn off.

TIMER

ON

OFF

2.Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours.

3.After 5 seconds, Timer OFF indicator light will remain on. Display will show the current room temperature.

To set the Timer to turn on the air conditioner while keep- ing previous settings:

1.Turn on the air conditioner.

3UHVV7,0(57LPHU2QLQGLFDWRUOLJKWZLOOÀDVK'LVSOD\ZLOO

show remaining hours before the air conditioner will turn on.

3.Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours.

4.Timer On indicator light will remain on.

To set the Timer to turn on the air conditioner and change the previous settings:

1.Turn on the air conditioner.

2.Adjust the mode to Fan, Cool, Energy Saver or Dehum.

3.For Fan, Cool or Energy Saver mode, adjust the fan speed to High, Med or Low.

4.Adjust the temperature between 61ºF and 86ºF (16ºC and 30ºC).

NOTE: In Fan mode, the temperature cannot be set.

3UHVV7,0(57LPHU2QLQGLFDWRUOLJKWZLOOÀDVK'LVSOD\ZLOO show remaining hours before the air conditioner will turn on.

6.Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours.

7.Timer On indicator light will remain on.

To clear Timer delay program:

NOTE: Air conditioner can be either on or off.

1.Press TEMP/TIME once after it has been programmed. Display will show remaining time.

2.While the display is showing the remaining time, press TIMER untill Timer indicator light turns off.

To see or change the remaining time (in hours):

Timer Off :

1.Press TEMP/TIME once after it has been programmed.

Display on the air conditioner control panel will show remaining time.

2.While the display is showing the remaining time, press

the TEMP/TIME up or down arrow button to increase or decrease the time.

3.After 5 seconds, the display on the air conditioner control panel will show the current room temperature.

Timer On :

1.Display on the air conditioner control panel will show remaining time.

2.While the display is showing the remaining time, press the TEMP/TIME up or down arrow button to increase or decrease the time.

10