MAINTENANCE
WARNING:
When servicing, use only identical replacement parts. Use of any other parts can create a hazard or cause product damage.
WARNING:
Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which could result in serious personal injury.
REPLACING THE ANTENNA
See Figure 7, page 17.
If the radio should need a replacement antenna for any reason, the attached antenna can easily be removed and replaced.
Insert a phillips head screwdriver into the antenna screw slot.
Turn the antenna screw counterclockwise to remove.
Remove antenna when antenna screw has been removed.
Orient and insert replacement antenna flat end into antenna mounting hole.
Insert the phillips head screw into the antenna screw hole.
Turn the antenna screw with the phillips head screwdriver clockwise to attach and tighten.
BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING
WARNING:
Upon removal, cover the battery pack’s terminals with
NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 15 AFTER
FRENCH AND SPANISH LANGUAGE SECTIONS.
14 - English