Friedrich 9315345288 manual Swing Operation, Economy Operation, En-11

SWING OPERATION

Begin air conditioner operation before performing this procedure.

To select SWING Operation

Press the SWING button (Fig. 6 b11).

The SWING Display (Fig. 7 c7) will light.

Each time the SWING button is pressed, the swing operation will change in the following order.

Up/down swing operation Left/right swing operation

Swing operation stops Up/down/left/right swing operation

To stop SWING Operation

Press the SWING button and select STOP.

Airfl ow direction will return to the setting before swing was begun.

About Swing Operation

●Up/down swing: Swing operation begins using the following range according to the current airfl ow direction.

Airfl ow direction is 1–4 (for cooling, dry).

With the upper airfl ow-direction louver in the horizon- tal position, the lower airfl ow-direction louver moves (swings) to direct airfl ow to a wide area.

Airfl ow direction is 3–6 (for heating).

With the airfl ow-direction louvers set for downward or straight down airfl ow, airfl ow is directly mainly at the

floor.

●Left/right swing: The airfl ow-direction louvers move (swing) in the left/right airfl ow direction.

●Up/down/left/right swing: The airfl ow-direction louvers move (swing) in both the up/down and left/right airfl ow directions.

●The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or when operating at very low speeds.

●If the SET button(Vertical) is pressed during the up/down swing operation, the up/down swing operation will stop and if the SET button(Horizontal) is pressed during the left/right swing operation, the left/right swing operation will stop.

ECONOMY OPERATION

Begin Air Conditioner operation before performing this procedure.

To Use the ECONOMY Operation

Press the ECONOMY button (Fig.6 b4).

The ECONOMY Indicator Lamp (green) (Fig. 3 a7) will light. Economy operation begins.

To Stop the ECONOMY Operation

Press the ECONOMY button (Fig.6 b4) again.

The ECONOMY Indicator Lamp (green) (Fig. 3 a7) will go out. Normal operation begins.

●Indicator Lamp

OPERATION TIMER

ECONOMY

: Lighting : OFF

About ECONOMY Operation

At the maximum output, ECONOMY Operation is approximately 70% of normal air conditioner operation for cooling and heating.

●When ECONOMY operation is performed during the cooling mode, dehumidifi cation is improved. This function is especially con- venient when you want to remove the humidity in the room without signifi cantly lowering the room temperature.

●During ECONOMY operation, the thermostat setting automatically changes according to the temperature to avoid Unnecessary cooling and heating for the most economical operation.

●If the room is not cooled (or heated) well during economy operation, select normal operation.

●During the monitor period in the AUTO mode, the air conditioner operation will not change to ECONOMY operation even if ECON- OMY operation is selected by pressing the ECONOMY operation button.

●When economy operation mode is operated, the room temperature will be little higher than the set-temp under cooling mode and lower than set-temp under heating mode. Therefore, the economy mode is able to save more energy than other normal mode.

En-11

9315345288_OM.indb 11

2/24/2010 1:36:25 PM