Friedrich 9315345288 Name of Parts, En-4, Button, B14 Clock Adjust button B15 Test RUN button

Page 5

NAME OF PARTS

Fig. 1 Indoor Unit

a1 Operating Control Panel (Fig. 2)

a2 MANUAL AUTO button

When kept on pressing the MANUAL AUTO button for more than 10 seconds, the forced cooling operation will start.

The forced cooling operation is used at the time of installation.

Only for authorized service personnel's use.

When the forced cooling operation starts by any chance, press the START/STOP button to stop the operation.

a3 Indicator (Fig. 3)

a4 Remote Control Signal Receiver

a5 OPERATION Indicator Lamp (green)

a6 TIMER Indicator Lamp (orange)

If the TIMER indicator lamp flashes when the timer is operating, it indicates that a fault has occurred with the timer setting (See Page 15 Auto Restart).

a7 ECONOMY Indicator Lamp (green)

a8 INTAKE GRILLE (Fig.4)

a9 Front Panel

a10 Air Filter

a11 Airflow Direction Louver

a12 Power Diffuser

a13 Right-Left Louver

(behind Airflow Direction Louver)

a14 Drain Hose

Fig. 5 Outdoor Unit

a15 Intake Port

a16 Outlet Port

a17 Pipe Unit

a18 Drain port (bottom)

Fig. 6 Remote Controller

b1

Signal Transmitter

b2

MODE button

b3

MIN.HEAT button

b4

ECONOMY button

b5

SLEEP button

b6 TIMER MODE button

b7

FAN button

b8

START/STOP button

b9

SET button (Vertical)

b10

SET button (Horizontal)

b11

SWING button

 

b12

SET TEMP. button (

/ )

b13

TIMER SET ( /

 

 

) button

 

b14

CLOCK ADJUST button

b15

TEST RUN button

 

This button is used when installing the air conditioner, and should not be used under normal conditions, as it will cause the indoor unit’s thermostat function to operate incor- rectly.

If this button is pressed during normal op- eration, the indoor unit will switch to test op- eration mode, and the Indoor Unit’s OPERA- TION Indicator Lamp and TIMER Indicator Lamp will begin to fl ash simultaneously.

To stop the test operation mode, press the START/STOP button to stop the air condi- tioner.

b16 RESET button

c1 Remote Controller Display(Fig.7)

c2 Temperature SET Display

c3 Operation Mode Display

c4 SLEEP TIMER Display

c5 Transmit Indicator

c6 Fan Speed Display

c7 SWING Display

c8 Timer Mode Display

c9 Clock Display

9315345288_OM.indb 4

En-4

2/24/2010 1:36:19 PM

Image 5
Contents Mode D’EMPLOI Safety Precautions ContentsEn-2 Features and FunctionsMaintenance Filter Reset Thermo Sensor B16 B15 B14 C3 c6 En-3Name of Parts B14 Clock Adjust button B15 Test RUN buttonEn-4 ButtonEn-5 PreparationEn-6 OperationEn-7 About Mode OperationTo Stop Operation Press the START/STOP button b8 About Auto Changeover OperationEn-8 Timer OperationAbout the Sleep Timer Sleep Timer OperationEn-9 During Heating operationEn-10 Adjusting the Direction of AIR CirculationTypes of Air flow Direction Setting Economy Operation Swing OperationEn-11 To select Swing Operation Press the Swing button b11Manual Auto Operation Minimum Heat OperationEn-12 To use Minimum Heat Operation Press the MIN. Heat button b3En-13 Cleaning and CareSymptom Problem TroubleshootingEn-14 NormalEn-15 Operating TipsOperation and Performance Auto RestartTemperature and Humidity Range SpecificationCooling Mode Dry Mode Heating Mode Outdoor temperature Indoor temperaturePrécautions DE Sécurité SommaireFr-2 Caractéristiques ET FonctionsFr-3 A6 Voyant de la minuterie Timer orange A3 Voyant A4 Rècepteur du signal de tèlècommandeNomenclature DES Organes Fr-4Fr-5 PréparatifsLe mode souhaité Appuyez sur la touche Mode b2 pour choisirFonctionnement Fr-6Arrêt du climatiseur Appuyez sur la touche START/STOP b8 Propos du mode de fonctionnementFr-7 Fr-8 Fonctionnement PAR Minuterie DE ProgrammationFr-9 Fonctionnement TemporiséChangement des réglages du minuterie Propos de la minuterie à temporisateurPositions de réglage de direction du flux d’air Réglage DE LA Direction DU Flux D’AIRFr-10 Fonctionnement Oscillant Propos du mode oscillant SwingFonctionnement Économique Fr-11Propos du Mode DE Chauffage Minimum Pour arrêter le Mode DE Chauffage MinimumChauffage Minimum Fonctionnement MANUEL-AUTOMATIQUEFr-13 Nettoyage ET EntretienNettoyez la poussière avec un aspirateur ou en lavant Nettoyez à l’eauFr-14 Guide DE DépannageSymptôme Problème Voyez FonctionsFr-15 Conseils D’UTILISATIONFonctionnement et performance Remise en marche automatiqueFr-16 Fiche TechniquePlage de température et d’humidité Température intérieurePrecauciones DE Seguridad ÍndiceSp-1 Ocasionar la muerte o serias heridas al usuarioSp-2 Características Y FuncionesSp-3 Sp-4 Denominación DE LOS ComponentesSp-5 PreparativosSp-6 FuncionamientoNotas sobre el funcionamiento de los modos Sp-7Sp-8 Funcionamiento CON TemporizadorEmpleo del temporizador programable Si el aparato ya está funcionando pase al pasoPara cambiar los ajustes del tiempo Sp-9Empleo del temporizador Sleep de desconexión automática Notas sobre el temporizador de desconexión automática SleepTipos de ajustes de la dirección del flujo de aire Ajuste DE LA Dirección DE Circulación DEL AireSp-10 Operación EN Modo Ahorro DE Energía Funcionamiento DE VaivénSp-11 Para detener la función ahorro de energía EconomySp-12 Funcionamiento DE Calor Mínimo Minimum HeatFuncionamiento Manual Y Automático Sp-13 Limpieza Y MantenimientoLocalización DE Averías Síntoma Problema Vea la PáginaSp-14 FuncionesSp-15 Consejos Para EL FuncionamientoFuncionamiento y rendimiento Reinicio automáticoSp-16 EspecificaciónMargen de temperatura y humedad Temperatura interior9315345288OM.indb 24/2010 13646 PM 9315345288OM.indb 24/2010 13646 PM 9315345288OM.indb 24/2010 13616 PM

9315345288 specifications

Friedrich 9315345288 is a standout model in the realm of portable air conditioning units, designed to provide efficient and effective cooling solutions for residential and commercial spaces. Recognized for its blend of performance, durability, and user-friendly features, this model answers the needs of individuals seeking relief from heat without compromising on convenience.

One of the key characteristics of the Friedrich 9315345288 is its powerful cooling capacity. With a BTU rating typically around 12,000, it can effectively chill spaces up to 550 square feet, making it an excellent choice for medium-sized rooms. The unit operates quietly, which is a crucial factor for users who value peace in their living or working environments. Its noise levels are kept to a minimum due to advanced engineering, making it suitable for bedrooms, offices, or any area requiring a quiet atmosphere.

In terms of energy efficiency, the Friedrich 9315345288 stands out with its high Energy Efficiency Ratio (EER). This feature not only helps in lowering electricity bills but also reflects a commitment to environmentally friendly cooling solutions. Furthermore, it is equipped with a programmable timer and adjustable thermostat, allowing users to customize their cooling schedules to align with their daily routines.

The unit is designed with ease of use in mind, featuring a straightforward digital control panel with remote control access for added convenience. Users can easily manage settings, change modes, and adjust fan speeds at a distance. The Friedrich 9315345288 offers multiple fan speeds and cooling modes, including a dehumidification option that efficiently reduces excess humidity in the air, enhancing indoor comfort.

The construction of the Friedrich 9315345288 is robust, featuring high-quality materials that ensure longevity and reliability. Its portable design includes caster wheels, making it easy to move from room to room as needed. The unit also includes a washable air filter that promotes better air quality and requires minimal maintenance.

Overall, the Friedrich 9315345288 is an excellent investment for anyone looking for a reliable, efficient, and user-friendly air conditioning solution, providing comfort during the hottest months while keeping energy consumption in check.