Friedrich 9315345288 manual Features and Functions, En-2, Maintenance Filter Reset Thermo Sensor

FEATURES AND FUNCTIONS

INVERTER

At the start of operation, a large power is used to bring the room quickly to the desired temperature. Afterwards, the unit automatically switches to a low power setting for economic and comfortable operation.

HORIZONTAL AIRFLOW: COOLING/

DOWNWARD AIRFLOW: HEATING

For cooling, use horizontal airflow so the cool air does not blow directly on the occupants in the room. For heating, use down- ward airfl ow to send powerful, warm air to the fl oor and create a comfortable environment.

ECONOMY OPERATION

Limits the maximum operation current, and performs opera- tion with the power consumption suppressed. When economy operation mode is operated, the room temperature will be little higher than the set-temp under cooling mode and lower than set-temp under heating mode. Therefore, the economy mode is able to save more energy than other normal mode.

AUTO CHANGEOVER

The operation mode (cooling, dry, heating) is switched auto- matically to maintain the set temperature, and the temperature is kept constant at all times.

OMNI-DIRECTIONAL AIR FLOW (SWING OPERATION)

Three-dimensional control over air direction swing is possible through dual use of both an UP/DOWN air direction swing and RIGHT/LEFT air direction swing. Since UP/DOWN air direction

flaps operate automatically according to the operating mode of the unit, it is possible to set air direction based on the operat- ing mode.

REMOVABLE INTAKE GRILLE

The indoor unit’s INTAKE GRILLE can be removed for easy cleaning and maintenance.

MINIMUM HEAT OPERATION

The room temperature can be maintained at 50°F so as to pre- vent the room temperature from falling too far.

PROGRAM TIMER

The program timer allows you to integrate OFF timer and ON timer operations in a single sequence. The sequence can in- volve one transition from OFF timer to ON timer, or from ON timer to OFF timer, within a twenty-four hour period.

MILDEW-RESISTANT FILTER

The AIR FILTER has been treated to resist mildew growth, thus allowing cleaner use and easier care.

SUPER QUIET OPERATION

When the FAN button is used to select QUIET, the unit begins super-quiet operation; the indoor unit’s airflow is reduced to produce quieter operation.

SLEEP TIMER

When the SLEEP button is pressed during Heating mode, the air conditioner’s thermostat setting is gradually lowered during the period of operation; during cooling mode, the thermostat setting is gradually raised during the period of operation. When the set time is reached, the unit automatically turns off.

WIRELESS REMOTE CONTROLLER

The Wireless Remote Controller allows convenient control of air conditioner operation.

WIRED REMOTE CONTROLLER (OPTION)

The optional wired remote controller (model No.: UTY-RNBLU) can be used.

When you use remote controller, there are following different points as compared with using wireless remote controller.

[The additional functions for wired ones]

•Weekly timer

•Temperature set back timer

[The restricted functions for wired ones]

•MAINTENANCE (FILTER RESET)

•THERMO SENSOR

And you cannot use both wired and wireless remote controller simultaneously. (Only one kind can be selected)

9315345288_OM.indb 2

En-2

2/24/2010 1:36:17 PM