DeVillbiss Air Power Company L10120H2-2 Risk from Moving Parts, Risk of Burns, Risk of Falling

Page 5

HAZARD

RISK FROM MOVING PARTS

WHAT CAN HAPPEN

HOW TO PREVENT IT

MOVING PARTS SUCH AS THE PULLEY, FLYWHEEL AND BELT

NEVER OPERATE THE COMPRESSOR WITH GUARDS OR

CAN CAUSE SERIOUS INJURY IF THEY COME INTO CONTACT

COVERS WHICH ARE DAMAGED OR REMOVED.

WITH YOU OR YOUR CLOTHING.

 

ATTEMPTING TO OPERATE COMPRESSOR WITH DAMAGED

ANY REPAIRS REQUIRED ON THIS PRODUCT SHOULD BE

OR MISSING PARTS OR ATTEMPTING TO REPAIR COM-

PERFORMED BY AUTHORIZED SERVICE CENTER PERSON-

PRESSOR WITH PROTECTIVE SHROUDS REMOVED CAN

NEL.

EXPOSE YOU TO MOVING PARTS AND CAN RESULT IN

 

SERIOUS INJURY.

 

 

 

RISK OF BURNS

WHAT CAN HAPPEN

HOW TO PREVENT IT

TOUCHING EXPOSED METAL SUCH AS THE COMPRESSOR

NEVER TOUCH ANY EXPOSED METAL PARTS ON COMPRES-

HEAD OR OUTLET TUBES, CAN RESULT IN SERIOUS BURNS.

SOR DURING OR IMMEDIATELY AFTER OPERATION. COM-

 

PRESSOR WILL REMAIN HOT FOR SEVERAL MINUTES AFTER

 

OPERATION.

 

DO NOT REACH AROUND PROTECTIVE SHROUDS OR ATTEMPT

 

MAINTENANCE UNTIL UNIT HAS BEEN ALLOWED TO COOL.

 

 

RISK OF FALLING

WHAT CAN HAPPEN

HOW TO PREVENT IT

A PORTABLE COMPRESSOR CAN FALL FROM A TABLE,

ALWAYS OPERATE COMPRESSOR IN A STABLE SECURE

WORKBENCH OR ROOF CAUSING DAMAGE TO THE COM-

POSITION TO PREVENT ACCIDENTAL MOVEMENT OF THE

PRESSOR AND COULD RESULT IN SERIOUS INJURY OR

UNIT. NEVER OPERATE COMPRESSOR ON A ROOF OR

DEATH TO THE OPERATOR.

OTHER ELEVATED POSITION. USE ADDITIONAL AIR HOSE

 

TO REACH HIGH LOCATIONS.

 

 

RISK OF PROPERTY DAMAGE WHEN TRANSPORTING

COMPRESSOR

(Fire, Inhalation, Damage to Vehicle Surfaces)

WHAT CAN HAPPEN

HOW TO PREVENT IT

OIL CAN LEAK OR SPILL AND COULD RESULT IN FIRE OR

ALWAYS PLACE COMPRESSOR ON A PROTECTIVE MAT WHEN

BREATHING HAZARD, SERIOUS INJURY OR DEATH CAN RESULT.

TRANSPORTING TO PROTECT AGAINST DAMAGE TO VEHICLE

OIL LEAKS WILL DAMAGE CARPET, PAINT OR OTHER SURFACES

FROM LEAKS. REMOVE COMPRESSOR FROM VEHICLE IMMEDI-

IN VEHICLES OR TRAILERS.

ATELY UPON ARRIVAL AT YOUR DESTINATION.

 

 

ESW-99 — 9/26/99

5—ENG

MGP-SL10120H-2A

Image 5
Contents Monday Through Friday OUR Office Hours are fromTable of Contents Risk of Bursting What can Happen HOW to Prevent ITRisk of Explosion or Fire Risk of Electrical Shock Risk from Flying ObjectsRisk to Breathing Risk from Moving Parts Risk of Property Damage When Transporting CompressorRisk of Burns Risk of FallingDuty Cycle SpecificationsGlossary ON-RECEIPT Inspection General InformationDescription of Operation Horizontal Units Installation and BREAK-IN ProceduresVoltage and Circuit Protection Wiring InstructionsWiring of Compressor Units Break-In Procedures Air Filter InstallationAdditional Regulators Controls Lubrication and OilPiping When You Are Finished Operating ProceduresRoutine Maintenance Schedule MaintenanceAir Filter Inspection Replacement Service InstructionsOil Chart Check Valve Inspection and ReplacementSafety Valve Inspection and Replacement Adjusting Belt TensionMotor Pulley and Flywheel Alignment Additional ServiceStorage of Compressor Outfit Problem Cause Correction Troubleshooting GuideFuses. Time delay fuses should be marked 117-207 ft.-lbs No adjustment is necessary Compressor Diagram Key Part Number Description Compressor Parts ListCompressor Pump Diagram Parts List Service Notes This Warranty does not Cover Limited WarrantyWarranty Manual DEL Operador Para Compresor DE Aire DE DOS Etapas Tabla DE Contenidos Diagrama DE LA Bomba CompresoraInstalación Y Procedimientos Guía Para Diagnóstico¿QUÉ Puede OCURRIR? ¿CÓMO PREVENIRLO? Riesgo DE ExplosiónRiesgo DE Descarga Eléctrica Riesgo DE Objetos Arrojados POR EL AireRiesgo DE Inhalación Riesgo DE Quemaduras Riesgo DE Partes MóvilesRiesgo DE Caidas Riesgo DE Daños a LA Propiedad AL Transportar EL CompresorCiclo DE Trabajo EspecificacionesGlosario Inspección AL Recibir Información GeneralDescripción DE LA Operación Ubicación del Compresor de Aire Procedimientos Para LA Instalación Y AsentamientoMétodos de Anclaje para el Compresor de Aire Unidades HorizontalesCableado de las Unidades Compresoras Instrucciones para el CableadoVoltaje y Protección del Circuito Procedimientos para el Asentamiento Ensamblaje del Filtro de AireControles y Reguladores Adicionales Aceite y LubricaciónCm de diámetro TuberíasAl Terminar Procedimientos Para OperarPrograma de Mantenimiento Rutinario MantenimientoFiltro de Aire Inspección y Reemplazo Instrucciones Para EL ServicioAceite Inspección y Cambio Tabla de AceiteVálvula DE Seguridad Válvula de Seguridad Inspección y ReemplazoRegulación de la Tensión de la Correa Instrucciones Para EL Almacenaje DEL CompresorPoleas Propulsora y Volante Alineamiento Servicio AdicionalProblema Causa Solución Guía Para Diagnóstico DE ProblemasDefectuoso Remplazo si fuese necesario Correcto. Referirse a la sección de Aceite y Asistencia adicional Diagrama DEL Compresor Número EN Número DE Diagrm Parte Descripción Lista DE Partes DEL CompresorDiagrama DE LA Bomba DEL Compresor Número Diagrm DE Parte Descripción Lista DE Partes DE LA Bomba CompresoraNotas DE Servicio Esta Garantía no Cubre Garantía LimitadaGarantía