932VS Portable Band Saw
932VS Band Saw with 32V Vise
To Assemble 32V Vise
WARNING
Saw must be disconnected from power source before assembling the 32V Vise.
1.Remove two screws (A) and remove knob (C) and screw (B) (Figure 3).
BC
A
Figure 3
2.Position vise mounting bracket to band saw (Figure 4) and secure with two hex head bolts furnished with 32V Vise. (Torque: 40 to 50 in. lbs.)
Bolts
Cord
Slot
Figure 4
3.Reassemble knob (C), (Figure 3), using two longer mounting screws furnished with 32V Vise.
4.Position power cord to slot as shown in Figure 4.
To Use 32V Vise
WARNING Make sure band saw is disconnected from power source before securing to the workpiece.
1.Secure the workpiece to prevent movement during the cutting operation.
WARNING The workpiece must be secured to sup- port the weight of the work vise and the band saw.
2.Position the work vise on the workpiece and secure by tightening the clamp screw firmly (see Figure 5). The clamp must support the band saw.
NOTE! The vise should be positioned so that the clamp screw is vertical and above the workpiece.
Clamp Screw
Figure 5
RIGHT
WRONG
Figure 6
3. Attach band saw to work vise.
WARNING Keep hands away from saw blade when attaching and removing band saw.
6 | Ridge Tool Company |