Epson DW746 Lubricating Fence Head, Maintaining Fence System, Accessories, Repairs

Page 15

Lubricating Fence Head

The moving parts of your fence head FIG. 34 should be periodically greased. This

includes the area between the cams and locking levers, and between the cams and the fence head casting.

Maintaining Fence

System

Your fence should always slide freely. If it seems to require excessive force to slide or if it feels rough, wipe the rails

and fence head gliding surface with a cloth or paper towel. Check the move-

ment again. If it still feels rough, clean

the fence head with a mild solvent such as denatured alcohol or mineral spirits. Re-coat the rail with a heavy coat of paste wax or a light oil. Slide the fence head back and forth several times to coat the rail and fence. Wipe off any excess wax or oil from the rail.

If the fence head glide strips (arrows, Figure 35) become worn or damaged, it can easily be replaced. Consult your local DEWALT Service Center for parts and assistance.

FIG. 35

Accessories

WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT, recommended accessories should be used with this product.

If you need assistance in locating any accessory for your tool, please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call 1-800-4-DEWALT (1-800-433-9258) or visit our website www.dewalt.com.

DEWALT manufactures the following accessories for your saw: Mobile base

Sliding Table and Premium Gauge Iron Wing

Outfeed Table 52" Rail System Dado Throat Plate Steel Wing

30" Rail System

Low Profile Fence Face

Enhanced Miter Gauge

WARNING: Accessories mounted to the arbor shaft must be rated at a higher rpm than that shown on the tool (not motor) nameplate. Destruction to accessory and possibly injury may result.

Repairs

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (includ- ing brush inspection and replacement) should be performed by a DEWALT factory service center, a DEWALT authorized service center or other qualified service personnel. Always use identical replacement parts.

Three Year Limited Warranty

DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to nor- mal wear or tool abuse. For further detail of warranty coverage and warranty repair informa- tion, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-433-9258). This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.

In addition to the warranty, DEWALT tools are covered by our:

1 YEAR FREE SERVICE

DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase.

90 DAY MONEY BACK GUARANTEE

If you are not completely satisfied with the performance of your DEWALT Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund – no questions asked.

LATIN AMERICA: This warranty does not apply to products sold in Latin America. For prod- ucts sold in Latin America, see country specific warranty information contained either in the packaging, call the local company or see website for warranty information.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-4-DEWALT for a free replacement.

 

 

 

 

 

 

 

 

 

• USE SAW BLADE GUARD AND SPLITTER FOR EVERY

 

 

 

 

DANGER PELIGRO

 

 

 

 

 

 

 

 

 

 

 

OPERATION WHICH IT CAN BE USED, INCLUDING ALL

 

 

 

 

KEEP HANDS AWAY

 

 

 

 

 

 

 

 

 

 

 

THROUGH SAWING.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FROM BLADE

 

 

WARNING

• KEEP HANDS OUT OF THE LINE OF SAW BLADE.

 

 

 

 

 

 

 

 

 

MANTENGASE ALEJADO

 

 

• USE A PUSH-STICK WHEN REQUIRED.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DE LA HOJA DE SIERRA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English

13

Image 15
Contents Dewalt Page Grounding Instructions Definitions Safety GuidelinesGeneral Safety Rules Volt, Single-Phase OperationMinimum Gauge for Cord Sets Important Safety InstructionsAdditional Safety Rules for Table Saws Polarized PlugsSAW Blade Guard and Spreader Making a Push Stick Inside Back CoverKickbacks For Future USE Hardware Included with the DW746 Woodworker’s Table SawTools Included SpecificationsFeatures Fig DW746 Basic UnitUnpacking AssemblyAssemble the Fence Beam to the Fence Head Adjusting Fence to Table TOP FIGAdjusting the Fence Face Attach the Left & Right Side Support Tables FIGAdjust the Fence Scale Indicator FIG To adjustTo Install the SAW Blade Install and Adjust the Throat Plate FIGRip Fence Operation Cutting On-Off Switch FigSaw Blades OperationBevel Crosscutting Bevel RippingRipping Small Pieces CrosscuttingMaintenance CleaningDust Collection Maintaining Fence System AccessoriesThree Year Limited Warranty Lubricating Fence HeadTroubleshooting Directives relatives à la mise à la terre Définitions lignes directrices en Matière de sécuritéRègles de sécurité générales Conserver CES DirectivesCalibre Minimum Pour Rallonge Double isolationDirectives de sécurité importantes Fiches PolariséesFrançais Conserver CES Directives Pour UN Usage Ultérieur PROTÈGE-LAME ET Couteau SéparateurEffets DE Rebond Quincaillerie nécessaire Appareil de base DW746Outils compris Outils à fournirAssemblage Installer LA Manivelle DE BISEAU. FIGCaractéristiques fig DésemballageFixer LES Tables DE Soutien Gauche ET Droite FIG Assembler LA Barre DE Guidage Avant ET LES Supports FIGIl vous faut les articles suivants Consulter les DirectivesAssembler LA Poutre DU Guide À LA Tête DU Guide FIG Réglage DU Guide Avec LE Dessus DE Table FIGAlignement DU Guide DE Sciage EN Long Régler LA Face DU Guide FIGPour effectuer le réglage, procéder comme suit Pour Installer LA Lame DE ScieMettre LA Scie AU Niveau FIG Installer ET Régler LA Plaque DE Lumière FIGInstaller LE Couvercle DU Moteur FIG Régler L’ÉCHELLE DE Biseau FIGFonctionnement Fonctionnement du guide longitudinalInterrupteur Marche/Arrêt Fig Lames de scieTronçonnage Sciage en longSciage sur le long en biseau Sciage en long de petites piècesDépoussiérage Tronçonnage en biseauDécoupe à l’onglet Coupe à rainureMaintien du système du guide EntretienNettoyage Lubrification de la tête du guideDépannage AccessoiresRéparations Garantie limitée trois ansCoupes DE Sciage EN Long Mesures À Prendre Imprécises LA Machine Vibre DE Manière Mesures À Prendre ExcessiveCoupes D’ONGLET Imprécises Mesures À Prendre Coincement DU Matériau Durant LA Mesures À Prendre CoupeInstrucciones de conexión a tierra Definiciones Normas de seguridadInstrucciones de seguridad importantes Conserve Estas InstruccionesDoble aislamiento Enchufes PolarizadosCalibre Mínimo Para LOS Juegos DE Cables Normas de seguridad adicionales para las sierras de banco Protector DE LA Hoja Y Hendedor Varas DE Empuje Cara Interna de la ContratapaRetrocesos Artículos de ferretería necesarios EspecificacionesUnidad básica DW746 Herramientas incluidasInstale LA Manivela DE Biselado FIG Características FigDesembalaje EnsamblajeSujete EL Riel Trasero a LA Parte Superior DEL Banco FIG Ensamble EL Riel Delantero Y LAS Abrazaderas FIGAjuste LA Guía a LA Parte Superior DEL Banco FIG Ajuste LA Cara DE LA Guía FIGEnsamble LA Barra DE LA Guía a LA Cabeza DE LA Guía FIG Para Instalar LA Hoja DE LA Sierra Deslice la Guía de cortePara ajustar Instalar EL Conjunto DE Hendedor Y Protector FigNivele LA Sierra FIG Instalación Y Ajuste DE LA Placa Para Ranuras FIGAjuste LA Escala DE Biselado FIG Instale LA Cubierta DEL Motor FIGFuncionamiento Funcionamiento de la guía de corte longitudinalInterruptor de encendido/ apagado Fig Hojas para sierrasCortes transversales Corte longitudinalCortes longitudinales en bisel Cortes longitudinales de piezas pequeñasCorte de ranuras Cortes transversales en biselCortes a inglete Cortes a inglete compuestosColector de polvo MantenimientoLimpieza Reparaciones Lubrique la cabeza de guíaMantenimiento del sistema de guía AccesoriosGarantía limitada de tres años Póliza de GarantíaDetección de problemas Polvo Colector QUÉ Hacer Obstrucciones Manivelas DE Altura O QUÉ Hacer Biselado Difíciles DE Girar

DW746 specifications

The Epson DW746 is a powerful and versatile all-in-one printer designed for business and professional use. Known for its reliability and high-quality output, the DW746 caters to a wide range of printing needs, making it an ideal choice for offices and small workgroups.

One of the main features of the DW746 is its fast printing speed. It can produce up to 25 pages per minute for monochrome documents and approximately 12 pages per minute for color prints. This efficiency ensures that users can handle large workloads without experiencing frustrating delays.

In addition to speed, the Epson DW746 offers exceptional print quality. With a maximum print resolution of 4800 x 1200 dpi, it delivers sharp text and vibrant colors. This makes it suitable for a variety of printing tasks, from professional documents to marketing materials and high-quality photos.

The DW746 utilizes PrecisionCore technology, which is a key aspect of Epson's printing process. This technology employs an array of micro-fine nozzles to create extremely precise dots of ink, resulting in superior print quality and consistency. PrecisionCore also enhances the printer's durability and longevity, ensuring that it remains a reliable workhorse for years to come.

Another notable feature is the DW746's connectivity options. It supports a variety of connectivity methods, including USB, Ethernet, and Wi-Fi, allowing users to print directly from their computers, mobile devices, or even cloud services. This flexibility makes it easy to integrate the printer into any office setup, promoting seamless workflow and collaboration.

The printer is equipped with an automatic duplex printing feature, which allows for double-sided printing. This not only saves paper but also helps businesses to reduce their overall printing costs and environmental impact.

Additionally, the Epson DW746 has a robust paper handling capacity. It comes with a standard paper tray that can hold up to 250 sheets, along with a rear manual feed slot for specialty media. For larger print jobs, users can also equip the printer with optional paper trays to increase storage capacity.

In conclusion, the Epson DW746 stands out as a powerful all-in-one solution for businesses seeking speed, quality, and versatility. With advanced printing technologies, robust connectivity options, and efficient paper handling capabilities, it meets the demands of modern office environments while delivering impressive results.