Aurora Electronics PVI-3600-OUTD-UK-F-W manual System Design, Installation

Installation and Operator’s Manual	Page 15 of 63
(PVI-3600-OUTD-UK-F-W Rev.: 1.0)

Control of the internal temperatures to automatically drive the speed of the external cooling fan. This will allow the inverter to deliver the maximum output power for ambient temperatures up +40 ° C .

The AURORA is designed for safe and reliable operation. This is made possible by the use of redundant control circuits.

2.5System Design:

The overall system design of a wind system is critical to successful operation and maximizing energy production.

Step 1:

The first step is determining the wind resource at a location is a site survey and possible wind monitoring.

Step 2:

The second step is purchasing a pre-designed wind system that includes the Aurora Wind inverter with a turbine specific power curve.

Awind turbine model specific power curve is pre-programmed into the Aurora Wind Inverter. The wind power curve is used by the Aurora Wind Maximum power point tracking algorithm to product the maximum amount of available energy.

Step 3:

The third step a proper installation of the entire wind energy system.

3 INSTALLATION

WARNING: The electrical installation of AURORA must be made in accordance with the electrical standards prescribed by the local regulations and the National electrical standards.