Installation and Operator’s Manual | Page 59 of 63 |
| |
|
|
Description
Nominal input voltage
Minimum input voltage to connect to the grid
“Absolute Maximum Rating” for input voltage
Input voltage, MPPT operating range
Input voltage, MPPT range at full power
Max. operating input current (Wind MPPT Input)
Max. input power (Wind MPPT Input)
DC Ground fault protection
MPPT configuration
Value
PVI-3600-OUTD-UK-F-W
360Vdc
50Vdc
600Vdc
50Vdc to 530Vdc
200Vdc to 530Vdc
20Adc
3800 W
Ground fault detection and shut off of
Single Wind MPPT , Power Curve is specific to
the Wind Turbine model
As stated above, AURORA Wind performs MPPT on the programmed Wind turbine power curve and constantly researches the max. input Dc power point. This process is called MPPT (Maximum Power Point Tracking).
NOTE: If the input current supplied by the Wind Interface Box connected to the inverter is above the max. value and the input voltage is within the allowed range, the inverter is not damaged.