Model SB1027 | O P E R A T I O N | For Machines Mfg. Since 8/09 |
Control Panel
Use Figures
Main Power Switch: When turned ON, enables power to flow to the control panel.
Main Power Switch
Figure 17. Location of the main power switch on the
electrical box door.
Spindle Speed Display: Shows the current spindle speed in revolutions per minute (RPM).
Emergency STOP Button: When pressed, disables the flow of power to the mill's electrical components. Before resuming operation, this button must be reset by twisting it clockwise until it pops out.
Spindle |
|
|
|
Speed |
| Emergency | |
Display |
| ||
| STOP | ||
|
| ||
| Spindle | Button | |
|
|
| |
Spindle | Direction |
| |
Speed Dial | Switch |
|
|
|
| Coolant | ON |
|
| Switch | Button |
Figure 18. Control panel.
ON Button: When pressed, illuminates and enables power to flow to the mill's electrical components.
Coolant Switch: Turns coolant pump ON and OFF.
Spindle Direction Switch: Starts, stops, and reverses spindle rotation.
Spindle Speed Dial: Controls the spindle speed.