Tailstock
Rear Controls
T
M
N
S
O
P
Q
R
U
Figure 5. Rear controls.
Figure 4. Tailstock controls.
M. Tailstock Quill: Moves a tool or center mounted in the tailstock toward or away from the workpiece.
N.Tailstock Quill Lock Lever: Secures the quill position.
O.Tailstock Lock Lever: Secures tailstock in position along the bedway.
P.Graduated Scale: Indicates quill movement in increments of 0.001", with one full revolu- tion equaling 0.04" of quill travel.
Q.Quill Handwheel: Moves quill toward or away from spindle.
R.Offset Scale: Indicates relative distance of tailstock offset from spindle centerline.
S.Tailstock Offset Screws: Adjusts tailstock offset left or right from spindle centerline (1 of 2).
T.High/Low Range Lever: Sets the spindle speed range to LOW (100–1000 RPM) or HIGH (100–2000 RPM). Do NOT shift while lathe is running or damage to machine may occur!
U.Feed Direction Lever: Used to select leadscrew rotation direction. Up is for clock- wise rotation and leftward carriage move- ment. Center is neutral. Down is for counter- clockwise leadscrew rotation and rightward carriage movement.
End Gears
End
Gears
Figure 6. End gear components.
Configuring the end gears (shown in Figure 6) controls the speed of the leadscrew for thread- ing or power feed operations.
Model G0765 (Mfd. Since 12/13) |