Grizzly MODEL G0765 owner manual

8.Remove key and bushing from D gear shaft (see Figure 62).

Key

Bushing

Figure 62. D gear shaft key and bushing.

9.Remove existing B gear from keyed bushing shared with C gear.

10.Slide 65T B gear onto keyed bushing and firmly against C gear.

Model G0765 (Mfd. Since 12/13)

11.Slide 40T, 65T, and 50T gears onto gear shafts (see Figure 63), making sure to re- install key with 50T gear.

A (40T)

D (50T)

B (65T)

C (20 or 60T)

Adjuster

Hex Nut

Figure 63. End gear placement.

12.Slide bushing removed in Step 8 onto 50T gear.

13.Position adjuster so gears mesh. Then tight- en adjuster hex nut and B/C gear shaft hex nut.

14.Secure gears with cap screws and washers removed earlier.

15.Re-install end cover.

-45-