Grizzly MODEL G0765 Inventory, Installed Components Figure Qty, Packaged Components Figures Qty

Inventory

The following is a list of items shipped with your machine. Before beginning setup, lay these items out and inventory them.

— Change Gear (57-tooth)	1
— Change Gear (60-tooth)	1
— Change Gear (65-tooth)	1
— Change Gear (80-tooth, Installed)	2
S. 61⁄4" Faceplate	1

If any non-proprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

Installed Components (Figure 8)		Qty.
A.	3" Three-Jaw Chuck w/Internal Jaw Set	..... 1
B.	Steady Rest	1
C.	4-Way Tool Post	1
D.	Compound Rest	1
E.	Tailstock	1
F.	Chip Tray	1

H

I

Q

P

O

J

K

L

M

N

G. Feet (not shown)					4
	A	B	C	D		E

	F
	Figure 8. Installed components.
Packaged Components (Figures 9–11)		Qty.
H.	Hex Wrench Set (2.5, 3, 4, 5, 6mm)	1 Ea
I.	Wrench Set (6/7, 8/10, 13/16mm)	1 Ea
J.	Bottle for Oil	1
K.	3-Jaw Chuck External Jaw Set	1
L.	Dead Center MT#3	1
M.	Dead Center MT#2	1
N.	Fuse	1
O.	Cross Slide Handwheel Handle	1
P.	Carriage Handwheel Handle	1
Q.	3-Jaw Chuck Key	1
R.	Change Gear Set	1
	— Change Gear (20-tooth, Installed)	1
	— Change Gear (30-tooth)	1
	— Change Gear (35-tooth)	1
	— Change Gear (40-tooth)	2
	— Change Gear (45-tooth)	1
	— Change Gear (50-tooth)	1
	— Change Gear (55-tooth)	1
Model G0765 (Mfd. Since 12/13)

Figure 9. Packaged components.

R

Figure 10. Change gears.

S

Figure 11. Faceplate.

NOTICE

If you cannot find an item on this list, care- fully check around/inside the machine and packaging materials. Often, these items get lost in packaging materials while unpack- ing or they are pre-installed at the factory.

-17-