Delta 638518-00, SM400 instruction manual Accessories, Maintenance

Page 24

MAINTENANCE

KEEP MACHINE CLEAN

If using compressed air to clean out sawdust wear ANSI Z87.1 safety glasses. NEVER use solvents to

clean plastic parts. They could possibly dissolve or otherwise damage the material.

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable · Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable · Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Two Year Limited New Product Warranty

Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

24

Image 24
Contents Bench Band Saw Safety Guidelines Definitions General Safety RulesStay ALERT, Watch What YOU are Doing Additional Safety Rules for Band Saws This Band SAW is Intended for Indoor USE onlyPower Connections Grounding InstructionsUnpacking and Cleaning Extension CordsBench Band SAW Parts Assembly Assembling Table To MachineClosing Door Page Attaching Lamp to Machine Fastening Band SAW To Supporting SurfaceOperating Controls and Adjustments Locking Switch OFF PositionStarting Stopping SAW Opening and Closing DoorAdjusting Blade Tension Adjusting Upper Blade Guide AssemblyDisconnect Machine from Power Source Tracking the BladeAdjusting Upper Blade Guides and Blade Support Bearing Adjusting Lower Blade Guides and Blade Support Bearing Tilting the TableAdjusting the Table Positive Stops Adjusting Belt TensionChanging Blades Dust ChuteWrench Storage Carefully Turn Blade Inside OUTOperating the Band SAW Miter Guage OptionalCutting Curves Page Troubleshooting Guide RemedyTroubleshooting Guide Band SAW Blades Page Page Accessories MaintenanceSierra de Cinta de 9 pulg. para Banquillo Pautas DE Seguridad / Definiciones Normas DE Seguridad GeneralesPage Guarde Estas Instrucciones Conexiones a LA Fuente DE Alimentación Instrucciones DE Conexión a TierraCordones DE Extensión Instrucciones DE FuncionamientoDesempaquetado Y Limpieza Partes DE LA Sierra DE LA Venda DEL Banco 9 pulg Montaje Montaje DE LA Mesa a LA MaquinaPage Montaje DE LA Lampara a LA Maquina Afianzando LA Sierra DE Cinta a LA Superficie DE ApoyoControles DE Funcionamiento Y Ajustes Arrancando Y Deteniendo LA SierraBloqueando EL Interruptor EN LA Posicion DE Apagado Abriendo Y Cerrando LA Puerta BisagradaAjustando LA Tension DE LA Hoja Compensacion DE LA HojaAjustando EL Ensamblado DE LA Guia DE Hoja Superior Desconecte LA Maquina DE LA Fuente DE Energia Inclinando LA Mesa Ajustando LOS Topes Positivos DE LA Mesa Ajustando LA Tension DE LA CorreaCambio DE Hojas Almacenamiento Para LlavesOperacion DE LA Sierra DE Cinta Corte DE CurvasPage Guia DE Localizacion DE Averias Causa probableContinuacion Hojas DE Sierra DE Cinta Notas Mantenimiento AccesoriosPIEZAS, Servicio O Asistencia DE Garantía Modèle SM400 Lignes Directrices EN Matière DE Sécurité Définitions Règles Générales DE SécuritéAU Canada 505, PROM. SOUTHGATE, GUELPH, Ontario N1H 6M7 Mettre Latelier À Lépreuve DES Enfants Règles DE Sécurité Supplémentaires Pour LES Scies À Ruban Utiliser LA Scie À Lame Ruban Uniquement À L’INTÉRIEURConnexions Électriques Rallonges Électriques Directives D’UTILISATIONDésemballage ET Nettoyage Pièces DE LA Scie À Lame Ruban DE Po 22,86 cmAssemblage Assemblage DE LA Table À LA MachineOuvrir ET Fermer LA Porte » Page Fixer LA Lampe À Lappareil Fixer LA Scie À Lame Ruban À LA Surface DE SupportUtilisation DES Commandes ET Réglages Démarrage ET Arrêt DE LA ScieOuvrir ET Fermer LA Porte Réglage LA Tension DE LA Lame Alignement DE LA LameRéglage DU Module DU Guide DE Lame Supérieure LA Tension DE LA Lame »Page Inclinaison DE LA Table Réglage DES Butées Fixes DE LA Table Réglage LA Tension DE LA CourroieChangement DES Lames Goulotte DE PoussièreRangement DE LA CLÉ Utilisation DE LA Scie À Lame Ruban Jauge À Onglet FacultatifCoupe DE Courbes Page Cause probable Solution Guide DE DépannageProblème LA Lame NE Saligne PAS Lames DE Scie À Lame Ruban Remarques Remarques Accessoires FonctionnementRéparation GarantiePORTER-CABLE · Delta Service Centers