Delta 90513776 instruction manual Carton Contents, Assembly

Page 8

CARTON CONTENTS

1

2

Fig. 1

3

4

5

Remove the miter saw and all loose items from the carton.

Do not lift the miter saw by the switch handle. This action can cause misalignment. Always lift the machine by the base or the carrying handle.

1.Miter Saw

2.Dust Bag

3.1/2" Blade Wrench

4.5mm Hex Wrench

5.Table Lock Handle

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

ASSEMBLY

ASSEMBLY TOOLS REQUIRED

(Supplied)

*5mm hex wrench * 1/2” Blade wrench (Not supplied)

* Phillips head screw driver

* A square to make adjustments

8

Image 8
Contents Compound Power Miter Saw Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules Important Safety InstructionsAdditional Specific Safety Rules USE only Blades of the Correct SizePower Connections Grounding InstructionsFunctional Description Extension CordsForeword Minimum Gauge Extension CordCarton Contents AssemblyRotating the Table to the 90 Degree Position Disconnect Machine from Power SourceAttaching the Table Lock Handle Fastening the Machine to a Supporting Surface Moving Cuttinghead to the UP PositionAttaching the Dust BAG Using the Optional Work Clamp Locking the Switch in the OFF PositionOperation Table Hazard AreaAdjusting the Pointer Disconnect the Machine from the Power SourceRotating the Table for Miter Cutting Pointer and ScaleAdjusting Sliding Fence Adjusting the Blade Parallel to the Table SlotTilting the Cuttinghead for Bevel Cutting Rear SUPPORT/CARRYING HandleAdjusting 90 and 45 Bevel Stops Fence AdjustmentAdjusting the Downward Travel of the SAW Blade Adjusting the Tension of the Cuttinghead Return Spring Adjusting Sliding FIT Between Cuttinghead ARM and TrunnionAdjusting the Lower Blade Guard Disconnect the Machine from Power SourceTypical Operations and Helpful Hints Auxiliary Wood FenceGeneral Cutting Operations Wrong Cutting AluminumRight Cutting Crown Moulding Crown Moulding Other AnglesChanging the Blade MaintenanceBrush Inspection and Replacement Failure to Start TroubleshootingKeep the Machine Clean Warranty ServiceAccessories Sierra de Ingletes Compuesta Motorizada de 254 mm Instrucciones DE Seguridad Importantes No Exponga a LA Lluvia NI LA Utilice EN Lugares Húmedos Pautas DE SEGURIDAD/DEFINICIONESLA Propuesta 65 DE California Normas Generales DE Seguridad Instrucciones Importantes Sobre SeguridadNormas Específicas Adicionales DE Seguridad Nunca Corte DE Nuevo Pedazos PequeñosConexiones a LA Fuente DE Alimentación Instrucciones DE Conexión a TierraCordones DE Extensión Instrucciones DE FuncionamientoContenido DE LA Caja PrefacioEnsamblaje OperaciónUtilizar LA Abrazadera Opcional DEL Trabajo Arrancando Y Deteniendo LA MaquinaFijando EL Interruptor EN LA Posicion DE Apagado Rotacion DE LA Mesa Para EL Corte DE IngletesAdjustando LA Hoja Paralelamente a LA Ranura DE LA Mesa Ajuste DE LA Guía DeslizanteApoyo Posterior / Agarradera Para Portar Regulación DEL RebordeAjuste DEL Protector Inferior DE LA Hoja Funciones Tipicas Y Consejos UtilesRefrentado DE Madera Auxiliar Operaciones Generales DEL CorteCorte DEL Aluminio Corte DE Materiales ArqueadosMantenimiento Cambio DE LA HojaInspeccion Y Reemplazo DE LOS Cepillos Mantenga LAS Herramientas LimpiasLocalizacion DE Fallas Quel EST LE Problème ? QUE FAIRE…Garantia ServicioAccesorios Modèle SM100M Directives DE Sécurité Importantes Conserver CES DirectivesPage Règles Générales DE Sécurité Directives DE Sécurité ImportantesRègles DE Sécurité Spécifiques Supplémentaires Conserver CES DirectivesConnexions Électriques Directives DE Mise À LA TerreDescription Fonctionnelle Contenu DU CartonRallonges Électriques AVANT-PROPOSAssemblage FonctionnementDémarrage ET Arrêt DE LA Scie À Onglets Verrouillage DE L’INTERRUPTEUR EN Position D’ARRÊTTourner LA Table Pour Effectuer UNE Coupe À Onglet Pointeur ET ÉchelleRéglage DU Guide Coulissant Support ARRIÈRE/POIGNÉE DE TransportAjuster LA Lame Parallèlement À LA Fente DE LA Table Réglage DU Guide À 90 DE LA LameRéglage DU PROTÈGE-LAME Inférieur Opérations Courantes ET Conseils UtilesGuide Auxiliaire EN Bois Opérations DE Coupe GénéralesEntretien Coupe DE Moulures CouronnéesMoulure Couronnée Autres AnglesInspection ET Remplacement DE LA Brosse DépannageGarder LA Machine Propre Démarrage ImpossibleGarantie AccessoiresRéparation PORTER-CABLE · Delta Service Centers