Delta 90513776 Attaching the Table Lock Handle, Rotating the Table to the 90 Degree Position

For your own safety, do not connect the machine to the power source until the machine is completely assembled and you read and understand the entire instruction manual.

DISCONNECT MACHINE FROM POWER SOURCE!

ATTACHING THE TABLE LOCK HANDLE

Thread the table lock handle (A) Fig. 2 into the threaded hole (B) of the arm bracket.

B

A

Fig. 2

ROTATING THE TABLE TO THE 90° DEGREE POSITION

1.Turn the table lock handle (A) Fig. 3 counter-clockwise one or two turns, and depress the index lever (B) to release the 45° positive stop.

B

A

Fig. 3

2.Rotate the table to the left until the index stop engages with the 90° positive stop (Fig. 4). Tighten the table lock handle

(A).

A

Fig. 4

9