location and function of the electronic indicator system
MODEL 113.248440 & 113.248510 ON LY
BATTERY COVER RELEASE SLOTS
BATTERY COVER
& OPEN BATTERY OPEN •
ELECTRONIC
MEASUREMENT
KEY
BEVEL ANGLE KEY
SION KEY
SPEED KEY (FT. PER MIN.)
_ | IEFERENCE SET KEY |
DIGITAL READOUT DISPLAY
DIGITAL READOUT DISPLAY
The Liquid Crystal Display, or LCD, on this saw gives the user the ability to accurately position the blade and monitor the
BATTERY COVER
The Battery Cover covers the battery compartment, To.release the cover, insert a small coin into one of the release slots and twist. Remove the cover.
1. Installing the Battery
Bevel Angle - Shows the present angle of the blade
to the table. The _ keyis used toset thezero degree point.
Blade Tension - Displays the blade size for which the tension has been adjusted.
Blade Speed - Displays the speed of the blade in surface feet per minute (FPM).
NOTE: The function being displayed is indicated by an abbreviated name of the function in the left hand area of the display; either BEV, TEN, or FPM.
The battery is supplied with the loose parts. It is a
the ribs in the compartment. Do not force the battery. It if doesn't push in easily, remove the battery and check that it is positioned correctly.
2.Reinstall battery cover by inserting the tabs on the lower edge of the cover into the mounting holes in the control and pushing the cover into position.
24