Craftsman 113.248510 Trouble shooting ---electronics, 113.2485t, Suggested Corrective Action

Page 42

MODEL 113.248440

trouble shooting ---electronics

& 113.2485t 0

PROBLEM

Display does not change when blade speed is changed.

Display changes back and forth between

3000 & 2800 in fpm function.

PROBABLE CAUSE

1.Wrong display function selected.

2.Encoder or digital display defective.

1.Slight variations in in blade speed.

SUGGESTED CORRECTIVE ACTION

-Select FPM function.

-Have electronics checked by qualified

technician. Repair service available at nearest Sears store.

-Normal.

Display does not change when blade tension is changed.

Display shows

in tension function.

!E 1

1.

Wrong display

function

- Select

_

function.

 

selected.

 

 

 

 

 

 

2.

Encoder

or digital

- Have electronics checked by qualified

 

display

defective.

technician.

Repair service available at nearest

 

 

 

 

Sears store.

 

3.

Encoder

not

engaged

- Engage

tab

of actuator with encoder.

 

with tab

on actuator.

 

 

 

1

Blade too tight.

- Normal. Reduce blade tension.

42

Image 42
Contents Save This Manual For Future Reference 113.248320113.248440113.248510 Table of Contents USE Recommended Accessories Never Stand on Tool Know Your Power Tool Ground ALL ToolsKeep Work Area Clean Keep Guards in PlaceWhen Installing or Moving the SAW Additional safety instructions for band sawBefore Using the SAW Before Each USEAccessories Before SandingWhenever SAW is Running Power Supply Glossary of terms for woodworkingSawdust from interfering with normal motor ventila- tion Motor Safety ProtectionWire Sizes 25 Ft 26 50 Ft 100 FtUnpacking and checking contents General informationLoose Parts Description QTYList of Loose Parts in BAG #508014 List of Loose Parts in BAG #507968Truss Head Screw 1/4-20x12 Pan Hd. Screw 10-32 xAssembly and alignment Nuts Support Bracke Leveling FootModel 113.24821 O Attaching LEG SETDescription Qty Truss Head Model Assembling Cabinet\ ,/o Mounting the SAW to the Cabinet From loose parts bag find the following hardWare Front Mounting the Motor Model 113.248210 onlyAttaching the Handwheel Find the following partsModels 113.248440, Tighten Flange NUT After Tensioning Beltwith Wing NUT Connecting the Motor Steps are CompletedModel 113.248320, 113.248440 Recommended Speed SettingsChanging Speed Settings Selecting Blade SpeedAttaching Trim Caps Getting to know your band saw MODELS113.248210an¢Battery Cover Location and function of the electronic indicator systemOpen Battery Open Model 113.248440 & 113.248510 on LYRead-out Indicates correct tension for Using the Electronic Indicator SystemFunction Keys 3000Installing the Blade Jrt,tGU,DEsuPPO.TIIl-r L Upperblade tl tModel 113.248440 Aligning the Blade and Blade Guide AssembliesBlade Guide Springs, two 2 alignment springs, and the four Mounting FrontTurn front table over. Locate the two 2 latch 4-20 8 hex washer Head thread forming ScrewsHead Capscrew Squaring the Blade to the Table Adjusting Front Table ON-OFF Switch Location and function of controlsModel 113.248210 & 113,248320 Adjusting Bevel Lock Knob Circle Cutting Basic band saw operationSawdust Collection Operation Recommended Blade SizeInstalling Sanding Attachment Installing the Sanding BeltMaintenance Adjusting Band SAW Bevel TravelAdjusting the Upper Blade Guide Travel Outlet Before Trouble Shooting Your Band SAW/SANDER Light BulbProbable Cause Trouble shooting--motorTrouble RemedyTrouble shooting -- electronics ProblemProbable Cause Suggested Corrective Action Trouble shooting ---electronics 113.2485tSuggested Corrective Action Key Part Description Repair partsParts List for Craftsman 12-INCH Band SAW LegPage Drive Assembly Parts KeyModel NOS .248210,113.248320, 113.248440 Base Assembly OMode1113.248320 Only ==Model113.248510 OnlyModel NOS .248210,113.248320,113.248440 Bevel Drive and Motor Mount Assembly Parts 9414202Parts List for Craftsman 12-INCH Electronic Band SAW Screw, Truss Hd /4-20 x 1/2Page Airs Part Numberpartdescription Model Name of Item