Craftsman 113.248510 owner manual Location and function of controls, Model 113.248210 & 113,248320

location and function of controls

ALL MODELS

ON-OFF SWITCH

NOTE: The On-Off switch has a locking feature. This featu re is intended to help prevent unauthorized and possibly hazardous use by children and others.

1.Insert yellow key into switch.

2.To turn on, insert finger under end of red switch lever and pull end out.

3.To turn off switch, push red lever in towards the base.

4WARNING: The locking feature provided is to help prevent unauthorized use of your saw. Always remove the yellow key and keep it in a safe place. To remove yellow key, hold thumb on the end of red lever to keep switch in "Off" position and pull yellow key straight out.

3

/

MODEL 113.248210 & 113,248320

TILTING HEAD FOR BEVEL CUT

1.Unlock bevel lock by pulling outon knob located under the left front edge of the table:

2.Turn handwheel counter-clockwise to increase

the tilt angle of the blade. The bevel scale printed on the front cover shows the approximate angle and is read at table level.

3.Lock the bevel lock by pushing in on knob until it is fully seated when desired bevel angle is reached.

BEVEL SCALE

BEVEL LOCK KNOB

HANDWHEEL

34