Grizzly manual Machine Inventory, G0634Z only Figure

MODEL G0634Z

JOINTER/PLANER

COMBINATION MACHINE W/

SPIRAL CUTTERHEAD

Manual Insert

The Model G0634Z is the same machine as the Model G0634 except it has a different type of spiral cutterhead. Except for the differences noted in this insert, all other content in the Model G0633/G0634 owner's manual applies to this machine. Before operating your new machine, you MUST read and under- stand this insert and the entire Model G0633/G0634 manual to reduce the risk of injury when using this machine.

If you have any further questions about this manual insert or the differences between the Model G0634Z and the Model G0633/G0634, contact our Technical Support at (570) 546-9663 or email techsupport@ grizzly.com.

Machine Inventory

Refer to the inventory in the G0633/G0634 Manual on Page 14. After all the parts have been removed from the crate, you should have the fol- lowing items:

Common Components (Figure 1)		Qty
A. Jointer/Planer Assembly (Not Shown)		........ 1
B.	Push Blocks	2
C.	Cutterhead Guard Assembly	1

D.Hardware and Tools (Not Shown)

— Wrench 12/14mm.	.................................. 1
— Hex Wrench 3mm	1
	C
B

G0634Z ONLY (Figure 2)
G. Spiral Cutterhead Hardware
—Indexable Carbide Inserts	5
—Flat Head Torx Screws 10-32 x 1⁄2"	10
—Torx Drivers T25	5
—T-Handle Wrench 1/4"	1

G

Figure 2. Spiral cutterhead hardware.

Figure 1. Common components.

Copyright © september, 2009 By Grizzly Industrial, Inc.

Warning: No portion of this manual may be reproduced in any shape or form without the written approval of Grizzly Industrial, inc. (For models manufactured since 5/09) #BL12040 printed in taiwan