DeWalt D28114R Mounting and Using Cutting Type 1 Wheels, Mounting Closed Type 1 Guard

Page 16

English

6. Remove the tool from the work surface before turning the tool off. Allow the tool to stop rotating before setting it down.

CAUTION: Use extra care when working over an edge, as a sudden sharp movement of grinder may be experienced.

Mounting and Using Cutting (Type 1) Wheels

Cutting wheels include diamond wheels and abrasive discs. Abrasive cutting wheels for metal and concrete use are available. Diamond blades for concrete cutting can also be used.

NOTE: All grinders that use Type 1 wheels use the quick-change backing flange (G).

WARNING: Failure to use proper flange and guard can result in injury resulting from wheel breakage and wheel contact. See page 7 for more information.

MOUNTING CLOSED (TYPE 1) GUARD

WARNING: Turn off and unplug the tool before making any adjustments or removing or installing attachments or accessories. Before reconnecting the tool, turn the switch on and off as previously described to ensure that the tool is off.

3. Rotate guard (I) into desired working position. The guard body should be positioned between the spindle and the operator to provide maximum operator protection.

4. Close

the

guard latch to

secure the

I

guard

on

the gear case

cover. You

 

should be unable to rotate the guard by hand when the latch is in closed position. If rotation is possible, tighten the adjusting screw (P) with clamp lever in P the closed position. Do not operate grinder with a loose guard or clamp lever in open position.

5.To remove the guard, open the guard

latch, rotate the guard so that the arrows are aligned and pull up on the guard.

NOTE: If, after a period of time, the guard becomes loose, tighten the adjusting screw (P) with the clamp lever in the closed position.

CAUTION: Do not tighten adjusting screw with clamp lever in open position. Undetectable damage to guard or mounting hub may result.

1.Open the guard latch (M). Align the lugs (N) on the guard with the slots (O) on the gear case.

2.Push the guard down until the guard lug engages and rotates freely in the groove on the gear case hub.

O

N

M

MOUNTING CUTTING WHEELS

WARNING: Turn off and unplug the tool before making any adjustments or removing or installing attachments or accessories. Before reconnecting the tool, turn the switch on and off as previously described to ensure that the tool is off.

CAUTION: Matching diameter backing flange and threaded clamp nut (included with tool) must be used for cutting wheels.

1.Place the quick-change backing flange on spindle with the raised section (pilot) facing up. The raised section (pilot) on the backing flange will be against the wheel when the wheel is installed.

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Esmerilhador de Ângulo Pequeno 115 mm/125 mm 4-1/2/5 Page Definitions Safety Guidelines General Power Tool Safety WarningsWork Area Safety Electrical SafetySpecific Safety Rules Additional Specific Safety Instructions for GrindersPower Tool USE and Care ServiceAlways Wear EYE Protection When Using this Tool Causes and Operator Prevention of KickbackVoltage Volts Total length of cord in meters m Description FIG Intended USEFeatures Assembly and AdjustmentsAccessories Rotating the Gear CaseMounting Guard 2 and 5 Grinding WheelsMounting and Removing Guard Wire Wheels Sanding DiscsOperation 2and 5 Sanding Flap DiscsGuards and Flanges Switches Soft Start FeaturePaddle Switch LOCK-ON ButtonEdge Grinding with Grinding Wheels Surface Finishing with Sanding Flap Discs Using Sanding Backing PadsMounting Sanding Backing Pads Mounting Wire Brushes and Wire Wheels Mounting and Using Wire Brushes and Wire WheelsUsing Wire CUP Brushes and Wire Wheels Mounting Closed Type 1 Guard Mounting and Using Cutting Type 1 WheelsMounting Cutting Wheels Maintenance Cleaning AccessoriesUsing Cutting Wheels LubricationSeguridad DEL Área DE Trabajo Definiciones Normas De seguridadSeguridad Eléctrica Seguridad Personal USO Y Mantenimiento DE LA Herramienta EléctricaInstrucciones DE Seguridad Para Todas LAS Operaciones MantenimientoNormas Específicas DE Seguridad Español Causas del retroceso y su prevención por parte del operador Antes DE Atención Colocar LO SiguienteEspañol Ténsion Volts Longitud del cable en metros m Componentes Fig Descripción FIGUSO Previsto Protección Contra Sobrecarga POWER-OFF Ensamblado Y AjustesCaracterísticas Rotación de la caja de engranajesProtector de montaje AccesoriosMontaje Y Extracción DEL Protector Cierre el cerrojo del protector para asegurar el mismo a Discos de alambre Discos de corte de 115 mm 2 y 125 mmDiscos de lijar Funcionamiento InterruptoresFunción DE Arranque Suave Interruptor DE Paleta Botón DE BloqueoBloqueo DEL EJE Montaje Y Extracción DE Discos CON CuboEsmerilado DE Superficie CON Discos DE Esmerilar Montaje DE Discos SIN CuboEsmerilado DE Bordes CON Discos DE Esmerilar Acabado DE Superficies CON Discos DE Lijar Montaje DE LAS Almohadillas DE Respaldo Para LijarMontaje y uso de cepillos de alambre y discos de alambre USO DE Almohadillas DE Respaldo Para LijarMontaje y uso de discos de corte Tipo Montaje DEL Protector Cerrado TipoMontaje DE LOS Discos DE Corte MantenimientoUSO DE Ruedas DE Corte Lubricación LimpiezaRegras Gerais de Segurança Definições Diretrizes de SegurançaGuarde Estas Instruções USO E Cuidados DA Ferramenta ReparosInstruções DE Segurança Específicas USE Sempre Proteção Para OS Olhos AO Usar Esta FerramentaCausas de retrocesso e prevenção do operador Tensão Comprimento do cabo de extensão Descrição FIG USO Devido DA FerramentaProteção Contra Sobrecarga POWER-OFF Montagem E AjustesRotação da caixa de engrenagem AcessóriosMontagem do protetor Montagem E Remoção do ProtetorDiscos de Arame de Aço Discos de LixarDiscos de Lixar de 4-1/2 e FuncionamentoProtetores e Flanges Interruptor DE PalhetaFunção DE Arranque Suave Interruptor DE BloqueioMontage E Remoção DE Discos do Cubo Bloqueio do EixoMontagem DE Discos SEM Cubos Esmerilhamento DE Superfície COM Discos DE Esmerilhar Esmerilhamento DE Superfície COM Discos DE EsmerilhamentoMontagem DAS Almofadas DE Bloqueio DE Lixar Acabamento DE Superfície COM Discos DE LixaUSO DE Almofadas DE Bloqueio DE Lixar Montagem DE Escovas DE FIO DE AÇO E Discos DE ARO Montagem e uso de escovas de fio de aço e discos de aroUSO DE Escovas DE Copo DE FIO E Discos DE ARO Montagem e uso de discos de corte Tipo Montagem DE Protetor Fechado TipoManutenção LubrificaçãoLimpeza Montagem DE Disco DE CorteEspecificações Page Page Page JUN10 Part No. N082734 D28114 Copyright @ 2009, 2010 D Ewalt

D28114R specifications

The DeWalt D28114R is a powerful and versatile angle grinder designed for both professional and DIY applications. Engineered with a strong focus on performance and durability, this tool stands out in the crowded landscape of power tools. With a robust 12-amp motor, the D28114R generates an impressive no-load speed of up to 11,000 RPM, allowing users to tackle tough materials with ease. Whether grinding, cutting, or polishing, this grinder provides the power and efficiency needed for a variety of tasks.

One of the standout features of the DeWalt D28114R is its innovative dust ejection system. This technology helps to protect the motor and bearings from debris, which can extend the tool's lifespan and maintain optimal performance. The grinder's design includes a sealed switch, which prevents dust and debris from entering and damaging the internal components, ensuring long-lasting functionality.

The D28114R also prioritizes user comfort and safety. Its two-position side handle provides extra control and flexibility during use, accommodating both left- and right-handed users. Additionally, the tool features a lock-on switch for extended grinding sessions, allowing users to operate the grinder comfortably without constant pressure on the trigger.

Durability is a key characteristic of the DeWalt D28114R. Its high-quality construction features a heavy-duty housing that can withstand the rigors of demanding jobs. The grinder is designed to handle tough conditions, making it a reliable choice for construction sites and workshops alike.

Another notable feature of the D28114R is its quick-change wheel release, which allows users to easily switch out grinding wheels and accessories without the need for additional tools. This feature enhances productivity and minimizes downtime during projects.

Moreover, the D28114R is compatible with a variety of wheels and attachments, making it an adaptable tool for various applications. From cutting metal to grinding welds, this angle grinder is equipped to handle every job.

In summary, the DeWalt D28114R angle grinder combines power, durability, and user-friendly features, making it a top choice among professionals and DIY enthusiasts. With its powerful motor, innovative dust ejection system, and emphasis on safety, this tool delivers reliable performance in a versatile and convenient package. Whether you are a seasoned tradesperson or a weekend warrior, the D28114R is designed to exceed your expectations and enhance your productivity on the job.
Top Page Image Contents