DeWalt D28114R Maintenance, Lubrication, Cleaning Accessories, Using Cutting Wheels

Page 17

2.Place the wheel on the backing flange, centering the wheel on the raised section (pilot).

3.Install the threaded clamp nut with the raised section (pilot) facing away from the wheel.

4.Depress the spindle lock button and tighten clamp nut with a wrench.

5.To remove the wheel, grasp and turn while depressing the spindle lock button.

USING CUTTING WHEELS

WARNING: Do not use edge grinding/ cutting wheels for surface grinding applications because these wheels are not designed for side pressures encountered with surface grinding. Wheel breakage and injury may result.

1. Allow tool to reach full speed before touching tool to work surface.

2. Apply minimum pressure to work surface, allowing tool to operate at high speed. Cutting rate is greatest when the tool operates at high speed.

3.Once a cut is begun and a notch is established in the workpiece, do not change the angle of the cut. Changing the angle will cause the wheel to bend and may cause wheel breakage.

4.Remove the tool from work surface before turning tool off. Allow the tool to stop rotating before setting it down.

MAINTENANCE

Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of injury, turn unit off and disconnect tool from power source before installing and removing accessories, before making any adjustments or removing/installing attachments or accessories.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure.

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

Accessories

WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT, recommended accessories should be used with this product.

Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center

English

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Esmerilhador de Ângulo Pequeno 115 mm/125 mm 4-1/2/5 Page General Power Tool Safety Warnings Definitions Safety GuidelinesWork Area Safety Electrical SafetyAdditional Specific Safety Instructions for Grinders Specific Safety RulesPower Tool USE and Care ServiceCauses and Operator Prevention of Kickback Always Wear EYE Protection When Using this ToolVoltage Volts Total length of cord in meters m Intended USE Description FIGAssembly and Adjustments FeaturesAccessories Rotating the Gear CaseMounting and Removing Guard 2 and 5 Grinding WheelsMounting Guard Sanding Discs Wire WheelsGuards and Flanges 2and 5 Sanding Flap DiscsOperation Soft Start Feature SwitchesPaddle Switch LOCK-ON ButtonEdge Grinding with Grinding Wheels Mounting Sanding Backing Pads Using Sanding Backing PadsSurface Finishing with Sanding Flap Discs Using Wire CUP Brushes and Wire Wheels Mounting and Using Wire Brushes and Wire WheelsMounting Wire Brushes and Wire Wheels Mounting Cutting Wheels Mounting and Using Cutting Type 1 WheelsMounting Closed Type 1 Guard Cleaning Accessories MaintenanceUsing Cutting Wheels LubricationSeguridad Eléctrica Definiciones Normas De seguridadSeguridad DEL Área DE Trabajo USO Y Mantenimiento DE LA Herramienta Eléctrica Seguridad PersonalMantenimiento Instrucciones DE Seguridad Para Todas LAS OperacionesNormas Específicas DE Seguridad Español Antes DE Atención Colocar LO Siguiente Causas del retroceso y su prevención por parte del operadorEspañol Ténsion Volts Longitud del cable en metros m USO Previsto Descripción FIGComponentes Fig Ensamblado Y Ajustes Protección Contra Sobrecarga POWER-OFFCaracterísticas Rotación de la caja de engranajesMontaje Y Extracción DEL Protector AccesoriosProtector de montaje Cierre el cerrojo del protector para asegurar el mismo a Discos de lijar Discos de corte de 115 mm 2 y 125 mmDiscos de alambre Función DE Arranque Suave InterruptoresFuncionamiento Botón DE Bloqueo Interruptor DE PaletaBloqueo DEL EJE Montaje Y Extracción DE Discos CON CuboEsmerilado DE Bordes CON Discos DE Esmerilar Montaje DE Discos SIN CuboEsmerilado DE Superficie CON Discos DE Esmerilar Montaje DE LAS Almohadillas DE Respaldo Para Lijar Acabado DE Superficies CON Discos DE LijarUSO DE Almohadillas DE Respaldo Para Lijar Montaje y uso de cepillos de alambre y discos de alambreMontaje DEL Protector Cerrado Tipo Montaje y uso de discos de corte TipoUSO DE Ruedas DE Corte MantenimientoMontaje DE LOS Discos DE Corte Limpieza LubricaciónGuarde Estas Instruções Definições Diretrizes de SegurançaRegras Gerais de Segurança Reparos USO E Cuidados DA FerramentaUSE Sempre Proteção Para OS Olhos AO Usar Esta Ferramenta Instruções DE Segurança EspecíficasCausas de retrocesso e prevenção do operador Tensão Comprimento do cabo de extensão USO Devido DA Ferramenta Descrição FIGMontagem E Ajustes Proteção Contra Sobrecarga POWER-OFFRotação da caixa de engrenagem AcessóriosMontagem E Remoção do Protetor Montagem do protetorDiscos de Lixar Discos de Arame de AçoFuncionamento Discos de Lixar de 4-1/2 eInterruptor DE Palheta Protetores e FlangesFunção DE Arranque Suave Interruptor DE BloqueioMontagem DE Discos SEM Cubos Bloqueio do EixoMontage E Remoção DE Discos do Cubo Esmerilhamento DE Superfície COM Discos DE Esmerilhamento Esmerilhamento DE Superfície COM Discos DE EsmerilharUSO DE Almofadas DE Bloqueio DE Lixar Acabamento DE Superfície COM Discos DE LixaMontagem DAS Almofadas DE Bloqueio DE Lixar USO DE Escovas DE Copo DE FIO E Discos DE ARO Montagem e uso de escovas de fio de aço e discos de aroMontagem DE Escovas DE FIO DE AÇO E Discos DE ARO Montagem DE Protetor Fechado Tipo Montagem e uso de discos de corte TipoLubrificação ManutençãoLimpeza Montagem DE Disco DE CorteEspecificações Page Page Page JUN10 Part No. N082734 D28114 Copyright @ 2009, 2010 D Ewalt

D28114R specifications

The DeWalt D28114R is a powerful and versatile angle grinder designed for both professional and DIY applications. Engineered with a strong focus on performance and durability, this tool stands out in the crowded landscape of power tools. With a robust 12-amp motor, the D28114R generates an impressive no-load speed of up to 11,000 RPM, allowing users to tackle tough materials with ease. Whether grinding, cutting, or polishing, this grinder provides the power and efficiency needed for a variety of tasks.

One of the standout features of the DeWalt D28114R is its innovative dust ejection system. This technology helps to protect the motor and bearings from debris, which can extend the tool's lifespan and maintain optimal performance. The grinder's design includes a sealed switch, which prevents dust and debris from entering and damaging the internal components, ensuring long-lasting functionality.

The D28114R also prioritizes user comfort and safety. Its two-position side handle provides extra control and flexibility during use, accommodating both left- and right-handed users. Additionally, the tool features a lock-on switch for extended grinding sessions, allowing users to operate the grinder comfortably without constant pressure on the trigger.

Durability is a key characteristic of the DeWalt D28114R. Its high-quality construction features a heavy-duty housing that can withstand the rigors of demanding jobs. The grinder is designed to handle tough conditions, making it a reliable choice for construction sites and workshops alike.

Another notable feature of the D28114R is its quick-change wheel release, which allows users to easily switch out grinding wheels and accessories without the need for additional tools. This feature enhances productivity and minimizes downtime during projects.

Moreover, the D28114R is compatible with a variety of wheels and attachments, making it an adaptable tool for various applications. From cutting metal to grinding welds, this angle grinder is equipped to handle every job.

In summary, the DeWalt D28114R angle grinder combines power, durability, and user-friendly features, making it a top choice among professionals and DIY enthusiasts. With its powerful motor, innovative dust ejection system, and emphasis on safety, this tool delivers reliable performance in a versatile and convenient package. Whether you are a seasoned tradesperson or a weekend warrior, the D28114R is designed to exceed your expectations and enhance your productivity on the job.
Top Page Image Contents