Cisco Systems 9001S, ASR9001s manual Nebs Bonding and Grounding for the Cisco ASR 9001 Router

Chapter 2 Unpacking and Installing the Chassis

Supplemental Bonding and Grounding Connections

Use this procedure to attach a grounding cable lug to the router:

Step 1 Insert the grounding screws through the locking washers, and into the threaded grounding receptacle on the Cisco ASR 9001 Router chassis as shown in Figure 2-6.

Step 2 Tighten the grounding screws securely to the receptacles.

Step 3 Prepare the other end of the grounding wire, and connect it to the appropriate grounding point at your site to ensure an adequate earth ground.

Figure 2-6 NEBS Bonding and Grounding for the Cisco ASR 9001 Router

332154

Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide

2-8 OL-26701-02