Cisco Systems ASR9001s, 9001S manual Cisco ASR 9001 Router Port Connection Guidelines

Chapter 1 Preparing for Installation

Cisco ASR 9001 Router Port Connection Guidelines

•One grounding wire. Although we recommend at least six AWG multistrand copper wire, the wire diameter and length depend on your router location and site environment.

Note These parts are not available from Cisco, but they are available from external commercial vendors.

Cisco ASR 9001 Router Port Connection Guidelines

This section contains detailed cabling and signal information for all interface and port connections to the RP. It also provides information for Ethernet routing and equipment.

Caution Ports labeled Ethernet, SYNC, CONSOLE, and AUX are safety extra-low voltage (SELV) circuits. SELV circuits should only be connected to other SELV circuits.

Note In Cisco ASR 9001-S Router, two 10 GE fixed SFP+ ports (SFP+2 and SFP+3) are disabled by default, and can be enabled by a license upgrade.

Figure 1-23shows all the port connections on the front panel of the Cisco ASR 9001 Router.

Figure 1-23 Cisco ASR 9001 Router Front Panel Ports

1 2 3 4 5 6 7 68 9 332426

1	Service LAN and ToD ports	6	External USB port
2	10MHz and 1PPS indicators	7	Eight discrete LED indicators
3	SYNC (BITS/J.211) ports	8	CLUSTER ports
4	CONSOLE and AUX ports	9	Fixed SFP+ ports
5	Management LAN ports

Table 1-2lists the Cisco ASR 9001 Router front panel ports description.

Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide

OL-26701-02 1-21