Cisco Systems ASR9001s, 9001S manual Proceed to the Powering on the Router section on

Chapter 3 Installing Modules and Cables in the Chassis

Connecting Power to the Router

Step 4 Plug the AC power cord into the receptacle at the front of the chassis (see Figure 3-11). Step 5 Close the cable wrap to secure the AC power cord plug to the power module receptacle.

Figure 3-11 Typical AC Power Connections

332894

Step 6 Plug the other end of the AC power cord into the AC source receptacle.

Step 7 Proceed to the “Powering on the Router” section on page 3-21.

	Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
OL-26701-02		3-19